锻压技术

有限元数值模拟在汽车覆盖件设计和制造中的应用

英文标题：Application of finite element numerical simulation in designing and manufacturing automotive panels

单位：江苏大学机械工程学院江苏大学机械工程学院江苏大学机械工程学院 (212013) (212013) (212013)

关键词：有限元数值模拟汽车覆盖件

分类号：TG382

出版年,卷(期):页码：2002,27(2):23-26

摘要：

汽车覆盖件成形同时包含大变形、 (粘 )塑性、接触、摩擦等多种非线性因素耦合 ,利用有限元法在计算机上模拟出板材从坯件到成品的全过程并加以图形显示 ,进而研究影响成形的各种因素 ,可以为板材成形的设计和生产提供可靠的依据。本文主要介绍有限元数值模拟技术的现状 ,并讨论了其在汽车覆盖件设计和制造上的应用

The sheet forming of automotive panel is complicated due to the simultaneous existence of high order nonlinear ties of geometry, materials, contact and friction. The finite element numerical simulation can investigate this complicated processes of sheet forming; Useful information can be obtained for the design and manufacturing of the sheet forming. In this paper, the actuality of the finite element numerical simulation technology is introduced, and the application of the finite element numerical simulation technology in the design and manufacturing of automotive panel is discussed.

基金项目：

参考文献：

1　ReissnerJ (ed).FE simulationof3Dsheetmetalformingprocessesinautomotiveindustry.Zurich,Switzerland,VDI Verlag,1991.
2　MakinouchiA .DevelopmentofanintegratedCAEsystemforsheetstampingdiedesign.In:XuBY ,YangW (eds).Advancesinengi neeringplasticityanditsapplications.Beijing,China,IAP ,1994:407-412
3　邓陟,王先进,陈鹤峥金属薄板成形技术北京:兵器工业出版社,1993
4　杨玉英大型薄板成形技术北京:国防工业出版社,1996
5　UAbdlsalam,M .Refeat,SMaclean,etal.SimulatingManufactur ingProcesses.AutomotiveEngineering,1997(4):31～33

服务与反馈：

【文章下载】【加入收藏】