|
摘要：
|
|
直齿圆柱齿轮精锻工艺是一种生产直齿圆柱齿轮的少无切削加工工艺 ,包括冷精锻工艺、热精锻工艺等。该工艺及其基础理论是各国学者普遍关注的研究课题。本文综述了国内外直齿圆柱齿轮精锻工艺的研究概况 ,分析了齿轮精锻工艺目前存在的问题和今后的发展趋势
|
|
Precision forging process, dividing in cold precision forging process and hot precision forging process,is a kind of less or no cutting process for producing spur gear.The process and its foundation theory is a valuable problem for study to which the world\|wide interrelated researchers paid more attention.In this paper,the research status at home and abroad of spur gear precision forging is summarizaed,then the existent questions and development trends are discussed.
|
|
基金项目：
|
|
江西省科研课题资助项目 ;;
华中理工大学塑性成形模拟及模具技术国家重点实验室开放课题资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
1 诸文俊等.浅谈国内外伞齿轮的精密模锻工艺.金属成形工艺,1991,9(1):6065
2 近藤一义.中空成形法ぉよひ分流方式齿形部品の精密冷间锻造.塑性と加工,1983,24(271).
3 KKondo.DevelopmentofNewPrecisionColdDieForgingProcess.AdvancedTechnologyofPlasticity,1stICTP ,Tokyo,1984.
4 KKondoetal.InvestigationintoFormingProcessesofVariousSpurGears.AdvancedTchnologyofPlasticity,2ndICTP ,Stuttgart,1987.
5 KKondoetal.ApplicationConditionofaFormingProcessforHollowArticlesHavingaFlangetoGear-toothedPartswithBoss.AdvancedTchnologyofPlasticity,3rdICTP ,Tokyo,1990.
6 KKondoetal.PrecisionColdDieForgingofaRingGearbyDividedFlowMethod.Int.J.Mach.ToolsManufact.,1995,35(8)
7 YNagaietal.TheTrialforFormingaSpurGearModefromtheDrawnCup.AdvancedTchnologyofPlasticity,4thICTP ,Peking,1993.
8 FDohmann&OTraudt.MetalFlowandToolStressinColdForgingofGearComponent,AdvancedTchnologyofPlasticity.2ndICTP ,Stuttgart,1987.
9 NAAbdul&TADean.AnAnalysisoftheForgingofSpurGearForms.Int.J .Mach.ToolDes.Res.,1986,26(2)
10 NRChitkaraetal.ComputerSimulationtoPredictStress,WorkingPressuresandDeformationModesinIncrementalForgingofSpurGearForms.Int.J.Mech.Sci.,1996,38(8,9)
11 NRChitkaraetal.Near-NetShapeForgingofSpurGearForms:AnAnalysisandSomeExperiments.Int.J.Mech.Sci.,1996,38(8,9)
12 OPGrover&BLJuneja.AnalysisofClosed-DieForgingofGearLikeElement.AdvancedTechnologyofPlasticity,1stICTP ,Tokyo,1984.
13 JCChoietal.AStudyontheForgingofSpurGears.Int.J .Mech.Sci.,1996,38(12).
14 江雄心.非稳态塑性变形的计算机模拟南昌大学硕士学位论文,1990.
15 陶泽球.直齿圆柱齿轮精锻研究.南昌大学硕士学位论文,1991.
16 王洪义等.一种齿轮精锻分析的新模型.锻压技术,1992,17(4)
17 SSheng&LuanYiguo.Int.J .Mach.ToolsManufact.,1994,34(2).
18 刘庆斌等.直齿轮成形数值模拟及实验研究.金属成形工艺,1995,13(1).
19 吴前进.空心直齿圆柱齿轮精锻上限分析与模拟.南昌大学硕士学位论文,1995.
20 江雄心,林治平.带毂直齿圆柱齿轮精锻的计算机模拟.金属成形工艺,1997,15(2)
21 江雄心,林治平.带毂直齿圆柱齿轮精锻成形的上限分析.塑性工程学报,1998,5(1)
22 陈泽忠.直齿圆柱齿轮精锻工步分析与实验研究南昌大学硕士学位论文,1998.
23 CTuncer&TADean.DieDesignAlternativesforPrecisionForg ingHollowParts.Int.J.Mach.ToolsManufact.,1987,27(1).
24 CTuncer&TADean.PrecisionForgingHollowPartsinNovelDies.J .Mech.WorkingTechnol.,1988(16).
25 VMDrecun&TADean.AParametricCADProgramforDieSetsforPrecisionForgingSpurGears.Int.J .Mach.ToolsManufact.,1991,31(2)
26 林治平等.直齿圆柱齿轮精锻工艺的实验研究.锻压技术,1991,16(6).
27 林治平等.带毂直齿圆柱齿轮精锻工艺的实验研究.江西工业大学学报,1992,14(4).
28 LZhipingetal.AStudyofPrecisionForgingStraightSpurGear.ProceedingsofInt.Conf.onAdvancedTechnol.&Mach.inMetalForming,Wuhan,China,1992.
29 林治平等.直齿圆柱齿轮精锻工艺的上限分析.闽赣皖鲁湘五省锻压年会宣读论文,1993.
30 谭险峰.直齿圆柱齿轮精锻工艺研究南昌大学硕士学位论文,1993.
31 田福祥等.直齿圆柱齿轮精密锻造的模具和工艺研究的技术报告,1993.
32 李洪波等.圆柱直齿轮浮动式精锻模设计,模具工业,1995,(9):175
33 AROAbdel-Rahman&TADean.TheQualityofHotForgedSpurGearForms,PartⅠ:MechanicalandMetallurgicalProperties.Int.J.Mach.ToolDes.Res.,1981,21(2).
34 AROAbdel-Rahman&TADean.TheQualityofHotForgedSpurGearForms,PartⅡ:ToothFormAccuracy.Int.J.Mach.ToolDes.Res.,1981,21(2)
35 DYYang.AThree-DimensionalRigid-PlasticalFiniteElmentAnalysisofSpurGearForgingUsingtheModularRemeshingTech nique.Proc.Inst.Mech.Engrs.,1991,205.
36 江雄心.直齿圆柱齿轮精锻过程的有限元模拟.南昌大学博士学位论文,1998.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
