|
摘要：
|
|
基于对三维实体流动模型的分析 ,研究了 3D气体辅助注射成型CAE中面网格生成的过程及其关键技术 ,指出 2 5D广义Hele Shaw模型分析方法是薄壁件气体辅助注射成型 3D实体流动模拟中适用性强 ,数值收敛性较好 ,且能满足CAE快速分析的实用技术。从此技术得到的shell和beam单元是进行气体辅助注射成型前处理 ,并进行CAE准确预测分析的重要手段
|
|
Base on analysis of 3D body flow model,that mid plane and skin mesh based technique for CAE of gas assisted injection molding(GAIM)is studied.It is pointed out that 2 5D Generalized Hele Shaw model is an applicable technique for 3D body flow simulation of GAIM,because it is of good flexibility and astringency,and can speed up the simulation.It is also concluded that,in order to obtain high accuracy of CAE of GAIM,shell and beam cells yielded from such a technique are of great importance for the pretreatment.
|
|
基金项目：
|
|
江西省主要学科跨世纪学术带头人资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
1 ECBernhardt(Ed.).ComputerAidedEngineeringforInjectionMolding.Hanser,1983.
2 TManzione(Ed.).ApplicationsofComputerAidedEngineeringinInjectionMolding.Hanser,1987.
3 CLTuckerIII (Ed.).FundamentalsofComputerModelingforPolymerProcessing.Hanser,1989.
4 VWWang,CAHieber,KKWang.DynamicSimulationandGraphicsfortheInjectionMoldingofThreeDimensionalThinPart.J.Polym.Eng.,1986,21(7)
5 PKennedy.FlowAnalysisReferenceManual,MoldflowPty.Ltd.,Hanser,1993.
6 JFHetu,DMGao,AGarciaRejon,GSalloum.3DFiniteElementMethodfortheSimulationoftheFillingStageinInjectionMolding.Polym.Eng.Sci.,38,223,1998
7 CSYong,FSLai.3DSimulationofThinWallInjectionMoldedPartbyCAE Paper#613,ANTEC 2000Conference,0rlando,2000
8 IFlorin,HJFrancois.3DSimulationofthePackingCoolingStageinPoly merInjectionMoldingPaper#113,ANTEC 2000Conference,0rlando,2000
9 RCapllmann,EHaberstroh.ThreeDimensionalSimulationoftheRubberInjectionMoldingProcessPaper#683,ANTEC 2000Conference,0rlando,2000
10 CHHsu,CHChiang.Trendinthedevelopmentofthepreprocessingtech niqueof25DmodelbasedmoldfillingCAEtoolCoreTechSystemCO .LTD ,2000
11 AdvancedCAETechnologyInc.C MOLDReferenceManualNewYork,1997.
12 ANSYSInc.ANSYSTechnicalOverviewANSYSInc.Beijing.1999
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
