锻压技术

锻造毛坯形状优化设计的研究

英文标题：Research on the shape optimization of billet in metal forging process

单位：山东大学模具工程技术研究中心山东大学模具工程技术研究中心山东大学模具工程技术研究中心山东大学模具工程技术研究中心 (250061) (250061) (250061) (250061)

关键词：锻造高径比黄金分割毛坯

分类号：TG312

出版年,卷(期):页码：2002,27(2):3-5

摘要：

近几年来 ,锻造形状优化得到了众多学者的关注。本文对单工序锻造问题的毛坯形状优化进行了研究。以毛坯高径比为优化设计变量 ,目标函数取为实际锻件超出预定理想直线部分的体积 ,以黄金分割法进行优化迭代 ,给出了目标函数的表示方法及计算表达式。并对一典型的轴对称H型锻件的毛坯形状进行了优化设计 ,取得了明显的效果

Shape optimization used in forging process is a focus point during the recent years,many research works have been made in this aspect. In this paper, a research work aimed to optimize the shape of billet of 2-dimensional forging is proceeded. The ratio of height to diameter of the cylindrical billet is taken as the optimal design variables. The volume of the part that is exceeded out the predetermined desired line is taken as the objective function. The expression of the objective function is given in detail. As there is only one optimal design variable-the ratio of height to diameter, the golden section method is used as the optimization tool. Using this method, the shape of the billet of a typical axisymmetric H-shaped forging process is optimized. The optimal results show that optimizing the billet shape is very useful and can get a satisfied result.

基金项目：

中国博士后科学基金资助项目 (中博基 2 0 0 0 [2 3] )

参考文献：

1SBadrinarayananandNZabaras.ASensitivityAnalysisfortheOpti malDesignofMetalFormingProcess,J .Mater.Proc.Technol.,1994(129):83～104
2　SBadrinarayananandNZabaras.PreformDesigninMetalForming,Processings.NUMIFORM95,S -F .ShenandP .Dawson,ed.,Ithaca,NY ,1995:533～538
3　LFourmentandJLChenot.OptimalDesignforNon-steady-stateMetalFormingProcesses-Ⅰ.ShapeOptimalDesignMethod,Int.J .Numer.MethodsEngng.,1996(39):33～50
4　LFourmentandJLChenot.OptimalDesignforNon-steady-stateMetalFormingProcesses-Ⅱ.ApplicationofShapeOptimizationinForging,Int.J.Numer.MethodsEngng.,1996(39):51～65
5　GuoqunZhao,EdWrightandRamanaVGrandhi.PreformSensitivi tyAnalysisBasedPreformDieShapeDesignforNet-ShapeForging,Int.Mach.ToolsManufact.,1997,37(9):1251～1271
6　赵国群,王广春等.材料塑性成形过程最优化设计-Ⅰ有限元灵敏度分析方法.塑性工程学报,1999,6(2):1～7
7　赵国群,王广春等.材料塑性成形过程最优化设计-Ⅱ灵敏度分析方法在模具设计中的应用.塑性工程学报,1999,6(3):1～6
8　杨冰实用最优化方法及计算机程序.哈尔滨:哈尔滨船舶工程学院出版社,1994
9　解可新,韩立兴,林友联.最优化方法.天津:天津大学出版社,1997

服务与反馈：

【文章下载】【加入收藏】