|
摘要：
|
|
建立了弹体毛坯收口工艺的刚粘塑性有限元模型 ,分析了在不同摩擦因子条件下弹体毛坯应力应变分布规律及可能产生的缺陷 ,为了获得所需的收口毛坯形状尺寸 ,其模具与坯料之间的剪切摩擦因子应控制在m =0 15以下。
|
|
The rigid visco plastic finite element model of shell nosing has been established in this paper,the stress and strain distribution and the defect which appears in shell has been analyzed at different friction factor.To obtain the expected configuration and dimension of shell blank,the friction factor at die blank interface is less than 0 15
|
|
基金项目：
|
|
塑性成形模拟及模具技术国家重点实验室资助
|
|
作者简介：
|
|
|
|
参考文献：
|
1 周杰等 高速钢扁锭锻造方坯内部裂纹研究 机械工程学报 ,1 996(5)
2 AltanT .Processsimulationofhotdie forging process.AdvancedTechnologyofplasticity ,1 988,1 1 (3) :37～ 41
3 KobayashiS ,OhSI,AltanT .Metalformingandfiniteelementmethod .NewYork :OxfordUniversityPress,1 988.
4 ShiroKobayashi.Approximatesolutionsforpreformdesigninshellnosing .Int.Mach .ToolDes.Res.1 983 ,2 3(2～ 3) :1 1 1～ 2 2 2
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
