|
正挤压时表面裂纹的估测
|
|
英文标题：Prediction of Surface Crack During Forward Extrusion |
|
作者：李淼泉 吴诗惇 |
|
单位： 西北工业大学 西北工业大学 |
|
关键词： |
|
分类号： |
|
出版年,卷(期):页码：1989,14(6):2-7 |
|
摘要：
|
|
本文运用上限原理获得了轴对称正挤压时表面裂纹形成的必要条件;研究了轴对称正挤压时表面裂纹的产生与变形程度、摩擦因数、坯料原始相对厚度及工作带相对长度的关系,从而可以估测低塑性材料正挤压时是否产生表面裂纹。本文的分析与计算结果为试验所证实。
|
|
In this paper, the necessary condition for surface crack formmation during the axisymmetric forward extrusion have been derived by using the upper-bound approach. Moreover. the relationships between the surface crack formation during extrusion and reduction in area, friction factor. relative original height of billet, or land length of punch are computed. Therefore. whether the surface crack may occur can be predicted before forward extruding the lower plasticity metals. The theorical results agree well with experimental results.
|
|
基金项目：
|
|
国家自然科学基金会资助
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] Avitzur B. Metal Forming: The Application of Limit Analysis. N.Y. & Basel, Marcel Dekker Inc., 1980．
[2] #12
[3] 程秀全(吴诗惇指导)。正挤压的有限元模拟。西北工业大学硕士论文,1988．
[4] 朱志文,吴诗惇。杯-杆型轴对称复合挤压上限法研究;西北工业大学学报,1985;3:(3) p307～319
[5] 吴诗惇,朱志文.复合挤压时的中心缩孔分析;第二回日-中冷间锻造论文集,东京;1987;p50～53
[6] Male A T. Cockcroft M G. A Method for the Determination of the Coefficient of Frcition of Metals under Conditions of Bulk Plastic Deformation. J.of Inst.of Metals, 1964; (93) p93．
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
