|
环件轨制的有限元分析
|
|
英文标题：Analysis of Ring Rolling by Finite Element Method |
|
作者：许思广 连家创 |
|
单位： 燕山大学 燕山大学 |
|
关键词： |
|
分类号： |
|
出版年,卷(期):页码：1989,14(6):21-27 |
|
摘要：
|
|
本文提出了处理从动芯辊速度及轧辊压下量分配的方法,从而解决了刚塑性有限元计算中所遇到的问题。计算与实验结果表明,这种方法具有简单、准确、计算速度快等优点。可用于环轧工艺分析和轧机设计,并适用于其它形式的非对称轧制有限元分析。
|
|
According to characteristics of ring rolling process, a method dealing with the unknown mandrel velocity and distribution of roll reductions is proposed so that the problems met in the rigid plastic FEM culculation of ring rolling is solved. The comparision of calculated and experimental results shows that the method has the merits of easy handling, exact results and short calculation time. with the FEM method, the ring rolling process and the disgn of ring rolling mill can be guided. Besides ring rolling, the given method can be also used in analysis of other asymmetric rolling processes.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] W. Johnson and A. G. Mamalis Ist.Meta Revs.1979 No.4 pp137-148
[2] 森谦一郎 塑性加工 Vol.24 No.273 pp.1022-1027(1983-10)
[3] 森谦一郎 小坂田宏造 塑性加工 Vol.23,No.260 pp.897-902(1982-9)
[4] Keu-ichiro Mori Susumu SHIMA and Kozo OSAKADA Bulletin of the JSMS Vol.23 No.178 pp.523-529(1980-4)
[5] 许思广 王海文 太原重型机械学院学报,Vol.9 No.3 pp.1-10(1988)
[6] Masujiro HAYAMA Bulletin of the Faculty of Engineering Yokohama National University. Vol. 31 March 1982, pp. 131-143．
[7] #12
[8] A. G. Mamalis W. Johnson and J. B. Hawkyard. J. Mech.Eng. Sci.Vol. 18, No. 4 pp. 197-209(1976)
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
