|
摘要：
|
|
针对坯料直径对铜扁线连续挤压的影响,采用刚粘塑性有限元模型,基于Deform-3D软件平台,进行三维有限元数值模拟,获得两种不同直径的坯料连续挤压扩展成形过程的金属流动规律、温度场、应力场、应变场以及挤压轮扭距。通过理论计算和对模拟结果的分析比较,初步确定了坯料直径和金属塑性变形的关系,为连续挤压工模具设计提供了理论依据。
|
|
As for the feedstock diameter influence on copper bus bar continuous extrusion,using rigid viscoplastic finite element model,based on the Deform-3D software platform and three-dimensional finite element numerical simulation,two different feedstock continuous extrusion forming processes of expansion metal flow pattern,temperature field,stress field,strain field,as well as torque were obtained.Through theoretical calculations and simulation results of the analysis and comparison,the relationship between feedstock and deformation on continuous extrusion was set up initially,and a theoretical basis was provided on tool and die design.
|
|
基金项目：
|
|
国家自然科学基金重点资助项目(50635020)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Kim Y H,Cho J R,Jeong H S,et al.A study on optimaldesign for conform process[J].Journal of Materials Pro-cessing Technology,1998,80(8):671-675.
[2]Etherington C.Conform-a new concept for the continuous ex-trusion forming of metals[J].Journal of Engineering forpower,1974,96(3):893-900.
[3]童隆长.塑性加工过程有限元法模拟的现状和困难[J].塑性工程学报,2002,9(4):126.
[4]谢玲玲,宋宝韫.铜母线连续挤压扩展成形过程的三维有限元数值模拟[J].锻压技术,2005,31(3):72-75.
[5]林高用,周佳等.基于Deform-2D的纯铜管热挤压过程的数值模拟[J].热加工工艺,2006,35(17):51-53.
[6]刘元文,宋宝韫,樊志新,等.TLJ 300铜扁线连续挤压机的研制[J].电线电缆,2003,2(1):44-48.
[7]张新宇,宋宝韫,李明典,等.连续挤压塑变区速度场分析及功率计算[J].中国机械工程,1999,10(1):61-63.
[8]樊志新,宋宝韫,刘元文,等.连续挤压变形力学模型与接触应力分布规律[J].中国有色金属学报,2007,17(2):283-289.
[9]李明典,宋宝韫,杨鑫华,等.连续挤压轮槽塑变区应力分析及几何参数的确定[J].塑性工程学报,1999,6(3):25-30.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
