|
不等厚板料液压成形数值模拟和试验研究
|
|
英文标题：Simulation and experimental research on high pressure sheet metal forming of tailor rolled blank |
|
作者：吴江妙 杨志强 |
|
单位：浙江师范大学车辆工程系 |
|
关键词：高压板料成形 柔性辊压板坯 计算机辅助优化 有限元模拟 |
|
分类号：TG394 |
|
出版年,卷(期):页码：2010,35(1):29-32 |
|
摘要：
|
|
与传统的轧制板材相比,采用高压板料成形工艺加工的柔性辊压板坯可以实现工件的优化生产,使其应用于各种特殊场合。本文通过有限元法实现了对柔性辊压板坯加工过程中两个主要阶段(柔性轧制和高压板料成形)的数值模拟与优化。优化过程包括对板料加工链和载荷条件下工件性能两方面的优化。数值模拟与试验结果的对比表明,有限元方法与优化工具的组合成功实现了整个加工链和工件性能的数值模拟与优化。
|
|
The high-pressure sheet metal forming of tailor rolled blanks allow the production of optimized components specially developed for their future function,which can not be made from conventionally rolled sheet metal.This research aims at showing that the two main processes,i.e.,flexible rolling and high-pressure sheet metal forming,can be well represented in finite element simulations.The optimization process includes the optimizing of blanks process chain and the tool performance under a predefined load.The result shows that it is possible to simulate and optimize entire process chains and the product properties by linking the finite element models with a combinatory optimization tool.
|
|
基金项目：
|
|
浙江省科技厅面上项目(2009C31063);;
浙江省教育厅一般项目(Y200805463)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]袁国定,靖娟,王友华,等.变压边力对连续变截面辊压板成形性能的研究[J].锻压技术,2009,34(2):50-53.
[2]Urban M,Krahn M,Hirt G,et al.Numerical research andoptimization of high pressure sheet metal forming of tailorrolled blanks[J].Journal of Material Processing Technology,2006,177(1-3):360-363.
[3]Rohleder M,Roll K,Brosius A,et al.Investigation of spri-ngback in sheet metal forming using two different testingmethods[A].Proceedings of the 4th International ES-AFORM Conference in Metal Forming[C].Liege,2001.
[4]Barlat F,Lian J.Plastic behavior and stretchability of sheetmetals.Part I:A yield function for orthotropic sheets underplane stress conditions[J].International Journal of Plastici-ty,1989,5(1):51-66.
[5]倪洪启,张金萍,王树强,等.超级钢板U型弯曲回弹的数值模拟和实验研究[J].锻压技术,2009,34(1):39-41.
[6]杨雪春,董懿琼,彭伟,等.U型件回弹控制模具补偿法的研究[J].锻压技术,2009,34(1):42-46.
[7]Posielek S,Kopp R.CAOT-a computer aided opti mizationtool applied on metal forming processes[A].The 7th Inter-national Conference on Numerical Methods in IndustrialForming Processes[C].Toyohashi,2001.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
