|
摘要：
|
|
本文用三维刚塑性有限元法对几种不同截面的环件轧制过程进行了分析。解决了芯辊转速确定,压下量分配,咬入曲线计算及边界条件处理等问题。所得到的结果有助于深入了解环件轧制过程的机理,对实际生产和轧制设计具有一定的指导作用。
|
|
In the present paper, rolling of rings with different cross sections is analysed by using a 3D rigid-plastic finite element method. The problems met in analysis, such as determination of mandrel velocity, distribution of roll reductions, initial contact lines between ring and rolls and boundary conditions are solved. The calculated results are very helpful to more deeply understand the deformation mechanics of ring rolling process and useful in practical ring production and design of mills.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] W.JOHNSON and A.G.MAMALIS, Rolling of Rings, Int. Meta. Revs., 1979, No.4, PP.137-148．
[2] W.JOHNSON and G.NEEDHAM, Experiments on Ring Rolling, Int.J.Mech. Sci., Vol.10,pp.95-113(1968)
[3] W.JOHNSON, LMACLEOD and G.NEEDHAM, An Experimental Investigation into the Process of Ring or Metal Tyre Rolling, Int.J.Mech. Sci., Vol.10,pp.455-468(1968)
[4] W.JOHNSON and G. NEEDHAM, Plastic Hinges in Ring Indentation in Relation to Ring Rolling, Int.J. Mech, Sci., Vol.10, pp.487-490(1968)
[5] A.G.MAMALIS, W.JOHNSON and J.B.HAWKYARD, On the Pressure Distribution between stock Stock and Rolls in Ring Rolling, J.Mech. Engng. Sci., Vol.18, No.4, pp.184-195(1976)
[6] A.G.MAMALIS, W.JOHNSON and J.B.HAWKYARD, Pressure Distribution, Roll Force and Torgue in Cold Ring Rolling, J.Mech. Engng. Sci., Vol.18, No.4, pp.197-209(1976)
[7] A.G.MAMALIS, J.B.HAWKYARD and W.JOHNSON, Spread and Flow Patterns in Ring Rolling, Int. J.Mech. Sci., Vol.18,pp.11-16(1976)
[8] J.B.HAWKYARD. W.JONHSON, J.KIRKLAND and E.APPLITON, Aralysis for Roll Force and Torque in Ring Rolling, with Some Supporting Experiments, Int. J.Mech. Sci., Vol.15, pp.873-893(1973)
[9] D.Y.YANG, J.S.RYOO, J.C.CHOI and W.JOHNSON, Analysis of Roll Torque in Profile Ring-Rolling of L-Section, zist Int. MTDR Conf, London, 1981,pp.69-74．
[10] J.S.RYOO, D.Y.YANG and W.JOHNSON, Ring Rolling, the Inclusion of Pressure Roll Speed for Estimating Torque by Using a Velocity Superposition Method, 24th Int. MTDR Conf., Manchester, 1983, pp.19-24
[11] M.HAYAMA, Theoretical Analysis of Ring Rolling of Plain Ring, Bull. Fac.Engng. Yokohama Nat. Univ., Vol.31, March, pp.131-143(1982)
[12] C.F.LUGORA and A.N.BRAMLEY, Analysis of Spread in Ring Rolling, Int J. Mech. Sci., Vol.29,pp. 149-159( 1987)
[13] D.Y.YANG and K.H.KIM, Rigid-Plastic Finite Element Analysis of Plane strain Ring Rolling Int J. Mech. Sci., Vol.30, No.8, pp.571-580(1988) .
[14] S.G.XU (许思广), J.C. LIAN (连家创 ) and J.B. HAWKYARD, Simulation of Ring Rolling Using a Rigid-Plastic Finite Element Model, Int. J. mech. Sci., Vol.33, No.5, pp.393-401(1991)
[15] 志田茂,炭素钢变形抵抗实验式,塑性加工,pp.610-617． Vol.10,No.103(1968) .
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
