|
摘要：
|
|
温度变化是影响环件轧制过程的重要因素。本文考虑变形区和变形区以外两部分的不同传热特点,构造了环件连续轧制过程的温度变化有限元分析模型。该模型可用于实际生产中的工艺分析,不仅适用于环件轧制,亦适用于板带连轧等其它轧制过程。
|
|
Temperature variation is an important factor affecting ring rolling process. In the present paper, a thermal finite element model is proposed to analyze the temperature distribution in continuous multi-pass ring rolling process, while considering the different characteristics of heat transfer in deformation and non-deformation zones. The model is very useful in practical ring rolling production analysis and can find application in other rolling processes like strip and plate rolling etc.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] A. G. Mamalis, W. Johnson and J. B. Hawkard, On the Pressure Distribution between Stock and Rolls in Ring Rolling, J. Mech. Engng. Sci., Vol. 18, No.4, pp. 184-195(1976) .
[2] A. G. Mamalis, W. Jognson and J. B. Hawkyard, Pressure Distribution Rolls Force and Torque in Cold Ring Rolling, J. Mech. Engng. Sci., Vol. 18, No.4, pp. 197-209(1976) .
[3] D. Y. Yang, J. S. Ryoo, J. C. Choi and W.
Johnson, Analysis of Roll Torque in Profile Ring-Rolling of L-Section, 21st Int. MTDR Conf., London, 1981, pp.69-74．
[4] J. S. Ryoo, D. Y. Yang Aand W. Johnson, Ring Rolling, the Inclusior of Pressure Roll Speed for Estimating Torque by Using a Velocity Superposition Method, 24th Int. MTDR Conf., Manchester, 1983, pp. 19-24．
[5] M. Hayama, Theoretical Analysis of Ring Rolling of Plain Ring, Bull. Fac. Engng. Yokohama Nat. Univ., Vol.31, March, pp. 131-142(1982) .
[6] C. F. Lugora and A. N. Bramley, Analysis of Spread in Ring Rolling, Int. J. Mech. Sci., Vol.29, pp. 149-159(1987) .
[7] D. Y. Yang and K. H. Kim, Rigid-Plastic Finite Element Analysis Plane Strain Ring Rolling, Int. J. Mech. Sci., Vol. 30, No.8, pp. 571-580(1988) .
[8] S.G. Xu (许思广) ,J.C. Lian (连家创) and J. B. Hawkyard, Simulation of Ring Rolling Using a Rigid-Plastic Finite Element Model, Int. J. Mech. Sci., Vol. 33, No.5, pp. 393-401(1991) .
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
