|
300MN模锻水压机主分配器的接力器建模与仿真
|
|
英文标题：Modeling and simulating of main distributor's hydraulic servomotor for 300MN die forging hydraulic press |
|
作者：黄长征 刘彬 谭建平 |
|
单位：韶关学院机电系 中南大学机电工程学院 |
|
关键词：模锻水压机 液压系统 分配器 接力器 建模 仿真 |
|
分类号：TG315.42 |
|
出版年,卷(期):页码：2009,34(5):118-120 |
|
摘要：
|
|
主分配器的接力器是300 MN模锻水压机的主要部件之一,其动态性能将影响水压机的操纵性能。采用传递函数法建立主分配器的接力器动态模型,基于Matlab的Simulink工具箱进行仿真。仿真结果表明,接力器活塞速度响应滞后约1 s,振荡一段时间后达到新的稳态值;随着进油腔体积的不断增大,活塞速度动态响应性能得到提高。系统安装时,应调整好进油腔体积,以提高系统动态响应性能。
|
|
Main distributor's hydraulic servomotor is one of major parts for 300MN die forging hydraulic press.Its dynamics response characteristic can affect operation performance of the hydraulic press.With the transfer function method,dynamics model of main distributor's hydraulic servomotor was established,and was simulated by Simulink Toolbox of MATLAB software.Simulation result shows that response lag time of piston speed in hydraulic servomotor is about 1s,and reaches new steady state value after oscillating within some time,dynamics response performance of piston speed is improved with increasing inlet oil reservoir volume,and when hydraulic system is assembled,inlet oil reservoir volume should be adjusted in order to improve dynamics response performance of the system.
|
|
基金项目：
|
|
“863”计划项目(2007AA04Z417)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]谭建平,黄长征,周俊峰,等.300 MN模锻水压机操纵系统改造[J].锻压技术,2007,32(3):80-84.
[2]黄长征.300 MN模锻水压机动梁驱动系统动态响应特性及速度控制研究[D].长沙:中南大学,2007.
[3]黄长征,谭建平.300 MN模锻水压机主分配器优化设计[J].中国机械工程,2007,18(16):1900-1903.
[4]黄长征,谭建平.液压机分配阀芯驱动凸轮升程曲线优化设计[J].中南大学学报,2007,38(2):303-308.
[5]Li S,Song Y.Dynamic response of a hydraulic servo-valvetorque motor with magnetic fluids[J].Mechatronics,2007,36(4):1-6.
[6]Sun Guangfu,Michael Kleeberger.Dynamic responses of hydrau-lic mobile crane withconsideration of the drive system[J].Mech-anismand Machine Theory,2003,66(38):1489-1508.
[7]冯天麟,唐晓群,田松液.压机用流量反馈型电液比例流量阀的研制[J].锻压技术,2008,33(3):94-96.
[8]谭建平,杨需帅.125 MN挤压机挤压中心在线监测系统设计[J].锻压技术,2008,33(3):133-137.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
