|
摘要：
|
|
以拖拉机后桥半轴法兰盘一火摆动辗压成形新工艺为研究对象,建立了三维刚粘塑性有限元模型,运用金属成形有限元分析软件Deform-3D对坯料成形过程及工件在加工过程中热能传递和散失进行了模拟分析。通过对工件在各变形阶段应力、应变及应变速率分布的分析,初步探讨了一火摆动辗压的成形规律及在仅加热一次的情况下温度场变化对金属成形效果的影响。温度场模拟结果表明:在法兰盘锻造成形过程中没有出现加工硬化等现象。
|
|
The moulding new process of rotary forging in one heat of ring flange in rear tractor-semiaxis was studied and a tri-dimensional rigid-plastic finite element model was built. The moulding process of blank as well as heat transfer and dissipation of workpiece in process were simulated and analyzed by Deform-3D. The stress, strain and strain's distribution in different transmuted stages of the workpiece were analyzed, the moulding rules of rotary forging in one heat and the effects on mental form due to changing of temperature field in one heat were discussed. The results of the temperature field simulation show that there are no hardening and other conditions during the flange forging process.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]付建华.汽车半轴一火锻造工艺及设备[J].锻压机械,2002,(3):39-40.
[2]毛春燕,付建华.汽车半轴摆动辗压成形研究[J].试验研究,2005,(3):83-85.
[3]吕成,张立文,牟正君,等.TC钛合金锻件锻造过程三维热力耦合有限元模拟[J].锻压技术,2007,32(1):28-31.
[4]徐国春,任广升,袁相勇,等.轴类件的柔性辊扎成形工艺与实验研究[J].塑性工程学报,2008,15(2):100-104.
[5]詹艳然,吴乐尧,王仲仁.金属体积成形过程中温度场的分析[J].塑性工程学报,2001,8(4):13-16.
[6]何涛,王宝雨,胡正寰.Inconel718合金楔横轧成形热力耦合模拟[J].塑性工程学报,2008,15(3):157-159.
[7]张猛,胡亚民.摆辗技术[M].北京:机械工业出版社,1998.
[8]邓华,段建辉,黄平,等.非稳态轧制过程的热力耦合刚塑性有限元模拟[J].中国机械工程,2008,19(15):1875-1878.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
