|
摘要：
|
|
针对大型复杂曲面工件,现有的测量设备很难实现三维全尺寸质量检测的难题。针对汽车大型模具泡沫实型的快速检测要求,分析了三维光学测量的原理,提出了基于工业摄影测量XJTUDP系统的检测方案,并进行了试验验证。结果表明:"XJTUDP三维光学点测量系统"的相对精度达到1/60000～1/150000,"XJTUOM型三维光学密集点云测量系统"精度达到0.03mm,完全满足要求,而且检测速度快,可以解决大型模具的快速检测难题。
|
|
As to the large work-piece with complicated curves, the traditional measurement apparatus are incapable to realize the whole size measurement. In view of the need of 3D rapid measuring in auto die and mould foam model, the principle of 3D optical measuring system was analyzed, the XJTUDP 3D optical measuring system was developed, and the convenience and practice of this system were also verified by amount of measuring tests. Experiment results show that the relative accuracy of the "XJTUDP" 3D optical point measuring system is about 1/60000 to 1/150000,and the absolute accuracy of the "XJTUOM" 3D optical area scan measuring system is 0.03mm. They can meet the requirement of measurement on large scale auto dies on the aspects of accuracy, speed and efficiency.
|
|
基金项目：
|
|
“863”项目(2007AA04Z124);;
江苏省科技支撑计划资助项目(BE2008058)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Fraser C S,Shortis M R.Variation of distortion within the photographic field[J].PE.&RS.,1992,58(6):851-855.
[2]Luhmann Th.Close Range Photogrammetry[M].UK:Whittles Publishing,2006.
[3]Luhmann Th,Wendt K.Recommendations for an acceptance and verification test of optical3D measurement systems[J].International Archives for Photogrammetry and Remote Sens-ing,2000,33(5):493-499.
[4]Munji R A H.Self-calibration using the finite element ap-proach[J].Photogrammetric Engineering and Remote Sens-ing,1986,52(3):411-418.
[5]Munji R A H.Calibration of non-metric cameras using the fi-nite element method[J].Photogrammetric Engineering and Remote Sensing,1986,52(8):1201-1205.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
