|
摘要：
|
|
基于ANSYS/LS-DYNA非线性显式有限元软件,以60kg.m-1重轨为研究对象,采用三维弹塑性热力耦合的有限元方法模拟了重轨在万能轧机组中的变形过程,有效的解决了轧制咬入难、网格畸变量大等难题。分析了典型道次的应力、应变分布和轧制力的变化情况,结果表明:刚咬入时轧件所受的纵向压力和横向压力均为压应力,应变与塑性变形的程度有关,轧制力与速度呈负相关关系。
|
|
Based on nonlinear explicit finite element soft ANSYS/LS-DYNA and taking 60 kg·m-1 heavy rail as a subject,some puzzles were solved effectively,such as entering difficulty of rolling and large mesh distortion ,ect.,while taking advantage of 3D elastic-plastic thermal-mechanical coupled FEM to simulate the rolling process of heavy rail in universal mill. The variational situation of stress,strain distribution and draught pressure in typical pass was analyzed. The result shows that both of the vertical pressure and horizontal stress that work on the workpiece at the beginning of entering are compressive stress,strain is related to the degree of plastic deformation,and a negative correlation between rolling force and speed is found as well.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]陈亚平,王彦中.攀钢高速铁路钢轨生产技术探讨[J].钢铁,2001,36(12):26-29.
[2]董志洪.21世纪钢轨钢的展望[J].钢铁,1999,34(8):73-75.
[3]周剑华,吴迪,赵宪明,等.全万能成品孔型轧制高精度重轨生产工艺研究[J].钢铁研究,2007,35(3):31-34.
[4]王艳敏,吴迪,赵宪明,等.轧制60kg/m高精度重轨半万能和全万能成品孔的研究[J].钢铁研究学报,2007,19(7):32-35.
[5]李国基.有限元法在模拟金属塑性加工过程方面的应用[J].锻压技术,1986,11(4):12-23.
[6]刘立忠,刘相华,王国栋.轧制过程的显式动力学有限元模拟[J].东北大学学报:自然科学版,2001,22(3):327-330.
[7]邹洋.60kg.m-1重轨万能轧制过程有限元模拟研究[D].武汉:武汉理工大学,2007.
[8]刘立忠,张绷,刘相华,等.隐式静力和显式动力有限元在轧制过程模拟中的应用[J].塑性工程学报,2001,8(4):81-83.
[9]白金泽.LS-DYNA3D理论基础与实例分析[M].北京:科学出版社,2005.
[10]沙刚,刘相华,徐列平,等.钢轨在轧制过程中的温度场[J].东北大学学报:自然科学版,1996,17(4):408-411.
[11]赵志业.金属塑性变形与轧制理论[M].北京:冶金工业出版社,1992.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
