|
摘要：
|
|
400 MN航空模锻液压机结构复杂,工作载荷和预应力巨大,在设计中采用有限元方法对其整机结构进行力学分析尤为重要。本文采用商业有限元软件Abaqus进行计算,重点考察了机架在预应力状态、中心和偏心载荷工作状态下的受力和变形状况。结果表明:在各种工况条件下,机架的位移、变形、挠曲和内应力都在设计的允许范围内,坎合界面两边始终保持大于50 MPa的面压,机架处于安全状态。
|
|
400 MN aviation die forging hydraulic press has a complex structure,very large working load and pre-stress,so mechanics analysis of the whole forging press is important by finite element method in the course of design.The stress and displacement of frame were analyzed in pre-stressed,center and off-center loading state using business software Abaqus.Result shows that the frame is safe;average compression stress of ridge-join interface is bigger than 50 MPa;the displacement,distortion,flexing and stress is within the design allowance range for three types of operating conditions.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]吴生富,金淼,聂绍珉,等.液压机全预紧组合机架的整体性分析[J].锻压技术,2006,31(3):111-114.
[2]彭俊斌,颜永年,张人佶,等.机械结构预应力坎合连接原理[J].清华大学学报(自然科学版),2007,47(8):1274-1277.
[3]颜永年,俞新陆.机械设计中的预应力结构[M].北京:机械工业出版社,1989.
[4]林峰,颜永年,吴任东,等.重型模锻液压机承载结构的发展[J].锻压装备与制造技术,2007,(5):27-31.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
