|
摘要：
|
|
双螺杆制备半固态坯料的思想来之于注塑行业挤出机的原理,与其不同之处在于半固态坯料制备中,更为注重的是其剪切和混合效果。本文基于以上思想,从双螺杆的设计起步,确定了双螺杆和与之对应的捏合块规格和参数,并对螺杆工作产生的轴向力进行了计算,选择了相应的止推轴承。此外,还估算了半固态坯料制备生产能力,解决了轴承径向尺寸和双螺杆中心距之间的矛盾。
|
|
The idea of producing metal semi-solid slurry using the device of twin-screw comes from the theory of polymer extruder used in injection industry,but they are not the same thoroughly.The device of twin-screw for metal semi-solid slurry preparation must be more efficient in shearing and mixing.Based on the above,the twin-screw and corresponding kneading blocks were designed,and the axial force occurred when the device in working condition was calculated.Besides,the production ability of metal semi-solid device was estimated and the contradiction between size of thrust bearing and center-to-center distance was solved.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50674017);;
中国博士后基金资助项目(20070420023)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]康永林,毛为民,胡壮麟.金属材料半固态加工理论与技术[M].北京:科学出版社,2004.
[2]李东成,于思荣,孙国滨,等.Al-3%Si半固态SI MA过程的微观组织演变[J].锻压技术,2007,32(3):103-106.
[3]杨辉,田文彤,刘峰.SI MA法制备7A04合金半固态触变组织的演化[J].锻压技术,2008,33(3):72-74.
[4]陈国平,周天瑞,闫洪,等.SI MA法处理AZ61热、冷压形变及半固态等温组织的比较研究[J].塑性工程学报,2008,15(1):112-117.
[5]姜巨福,王迎,杜之明,等.Mg-Al-Zn合金半固态坯的制备及触变成形研究[J].特种铸造及有色合金,2008,(28)6:432-434.
[6]唐湘山,徐骏,张志峰,等.电磁搅拌对7075铝合金微观组织及力学性能的影响[J].铸造技术,2008,29(7):896-899.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
