|
摘要：
|
|
通过有限元数值模拟分析了连续挤压较常规正挤压更能实现铜的更大扩展比挤压的原理。在连续挤压扩展模型的基础上建立了与之相对应的常规正挤压模型,对两种模型下金属的流动特性进行了对比分析。连续挤压与正挤压相比,由于在挤压轮槽区,受到挤压轮三面的主动摩擦力和腔体一面阻碍摩擦力的作用,有利于提高铜扩展成形金属流动的均匀性;而正挤压中坯料在挤压筒区受四面的摩擦阻力的作用,加剧了金属流动的不均匀性。所以,连续挤压中的扩展成形金属在产品宽度和厚度方向上流动较正挤压更均匀,成形产品的完整性更好。因此,连续挤压更利于铜的扩展成形。
|
|
The principle of the bigger ratio of copper extending obtained by continuous extrusion compared with forward extrusion was analyzed by finite element method.The forward extrusion model was built based on the continuous extrusion model.Then the flow characteristics contrast was carried out.In continuous extrusion,the metal in groove was under the action from three sides initiative friction and one side resistance friction,and it could improve the uniformity of metal flowing.In forward extrusion,the metal in container was in four-side resistance friction,and it could aggravate the nonuniformity of metal flowing.So in the thickness and width direction of product,the metal flowing is more uniformity during the continuous extrusion,and the integrality of product is finer.The continuous extrusion is propitious to the copper extending forming.
|
|
基金项目：
|
|
国家自然科学基金重点资助项目(50635020)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]宋宝韫,樊志新,陈吉光,等.铜、铝连续挤压技术特点及工业应用[J].稀有金属,2004,28(1):257-261.
[2]钟毅.连续挤压技术及其应用[M].北京:冶金工业出版社,2004.
[3]刘永亮、李耀群.铜及铜合金挤压生产技术[M].北京:冶金工业出版社,2007.
[4]李淼泉.摩擦在正挤压中心缩孔形成中的作用[J].模具技术,1993,(4):13-17.
[5]樊志新,宋宝韫,刘元文,等.连续挤压变形力学模型与接触应力分布规律研究[J].中国有色金属学报,2007,17(2):283-287.
[6]Reinikainen T,Andersson K,Kivivuort S.Finite-element a-nalysis of copper extrusion processes[J].Journal of Materi-als Processing Technology,1992,(34):101-108.
[7]Ki m Y H,Cho J R,Ki m K S,et al.Astudy of the applica-tion of upper bound method to the conformprocess[J].Ma-terials Processing Technology,2000,(97):153-157.
[8]Cho J R,Jeong HS.Parametric investigation on the curlingphenomenon in conform process by thress-di mensional finiteelement analysis[J].Journal of Materials Processing Tech-nology,2001,(110):53-60.
[9]Wu Peng-yue,Xie Shui-sheng,Li Hua-qin.Effect of extru-sion wheel angular velocity on continuous extrusion formingprocess of copper concave bus bar[J].Transactions of Non-ferrous Metals Society of China,2007,(17):280-286.
[10]储灿东,彭颖红,阮雪榆.连续挤压成形过程仿真中的摩擦模型[J].上海交通大学学报,2001,35(7):993-997.
[11]Katajarinne T,Manninen T,Ramsay P.Numerical si mulationof flashformation in continuous rotary extrusion of copper[J].Materials Processing Technology,2006,(177):604-607.
[12]谢玲玲,宋宝韫.铜母线连续挤压扩展成形过程的三维有限元数值模拟[J].锻压技术,2005,30(3):72-75.
[13]Cho J R,Jeong H S.Conform process:surface separation,curling and process characteristics to the wheel diameter[J].Journal of Materials Processing Technology,2003,(136):217-226.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
