|
摘要：
|
|
开发了纪念币压印成形专用有限元分析系统CoinForm,设计了单点积分的实体单元有限元动力显式程序。采用粘性沙漏控制算法有效控制了由于单点积分造成的沙漏模式,相比其它的沙漏控制算法,如刚度法以及采用稳定化矩阵求解沙漏力等算法,节省了大量计算时间。同时,沿坯饼厚向划分多层网格、三维的本构关系、径向返回算法以及自适应网格加密算法,使得本系统可以精确获取坯饼的应力应变分布。通过与DEFORM-3D 5.0模拟软件的模拟结果对比,纪念币的压印成形模拟实例验证了CoinForm系统的准确性和高效性。
|
|
A special-purpose finite element simulation system CoinForm was developed to analyze embossing process of commemorative coin,and one-point integration solid element finite element dynamic explicit program was designed.Viscosity damping hourglass control algorithm effectively suppressed the spurious modes activated by reduced integration,and saved much more computations compared with other methods,such as stiffness method and that solved anti-hourglass force using stabilization matrix.Meanwhile,multiple layers meshes along thickness direction,3D constitutive law,radial return algorithm and adaptive mesh refine method made this system accurately describe distribution of stress and strain.Finally,compared with DEFORM-3D 5.0,the embossing simulation results of commemorative coin verified the excellent performance and effectiveness of CoinForm simulation system.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50575080);;
国家科技支撑资助项目(2006BAF01A43);;
中国博士后科学基金(20080440930)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]郁祥桢,沈鸣镝.中国近代纪念币[J].金融世界,1999,(1):25-25.
[2]王世云.流通纪念币防假刻不容缓[J].西部金融,2007,(11):85-85.
[3]刘元文,曹雪,宋宝韫.铜连续挤压的有限体积法数值模拟[J].锻压技术,2007,32(6):148-152.
[3]林新波.DEFORM-2D和DEFORM-3D CAE软件在模拟金属塑性变形过程中的应用[J].模具技术,2000,(3):75-80.
[4]周朝辉,曹海桥,吉卫,等.DEFORM有限元分析系统软件及其应用[J].热加工工艺,2003,32(4):51-52.
[5]马新武,赵国群.体积成形有限元模拟软件CASFORM的开发研究[J].锻压技术,2003,28(1):9-13.
[6]薛永栋,韩静涛.基于DEFORM的金属压力加工数值模拟[J].冶金设备,2007,(4):34-37.
[7]邓明,夏庆发,罗光平.精冲-体积成形复合加工工艺及其应用[J].锻压技术,2007,32(2):41-44.
[8]Liu W K,Guo Yong,Tang Sing,et al.A multiple-quadra-ture eight-node hexahedral finite element for large deforma-tion elasto-plastic analysis[J].Comput.Methods.Appl.Mech.Engrg.,1998,154:69-132.
[9]Li K P,Cescotto S.An 8-node brick element with mixed for-mulation for large deformation analysis[J].Comput.Meth-ods.Appl.Mech.Engrg.,1997,14:157-204.
[10]Flanagan D P,Belytschko T.A uniform strain hexahedronand quadrilateral with orthogonal hourglass control[J].Int.J.for Num.Methods in Engrg.,1981,17:679-706.
[11]Belytschko T,Ong J S,Liu WK,et al.Hourglass control inlinear and nonlinear problems[J].Comput.Methods Appl.Mech.Engrg.,1984,43:251-276.
[12]Belytschko T,Bindeman L P.Assumed strain stabilization ofthe eight-node hexahedral element[J].Comput.MethodsAppl.Mech.Engrg.,1993,105:225-260.
[13]Liu WK,Hu Y K,Belytschko T.Multiple quadrature unde-rintegrated finite elements[J].Int.J.for Num.Methods inEngrg.,1994,37:3263-3289.
[14]Zhu Y Y,Cescotto S.Unified and mixed formulation of the8-node hexahedral elements by assumed strain method[J].Comput.Methods.Appl.Mech.Engrg.,1996,129:177-209.
[15]许江平,柳玉起,章志兵,等.变薄拉深过程模拟的有限元动力显式算法[J].锻压技术,2008,33(5):38-43.
[16]Xu J P,Liu Y Q,Li S Q,et al.Fast analysis systemfor em-bossing process si mulation of commemorative coin-CoinForm[J].Computer Modeling in Engineering&Sciences,2009,1123(1):1-16.
[17]John O Hallquist.LS-DYNA Theory Manuai[M].USA:California,Livermore Software Technology Corporation,2006.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
