|
摘要：
|
|
三辊行星旋轧变形复杂剧烈,对于其成形规律的研究具有很大的难度。本文采用有限元技术分析了三辊行星旋轧过程中变形规律,讨论了有限元模拟的关键技术。研究表明:三辊行星旋轧过程中,坯料的运动轨迹呈螺旋形,管坯的变形是通过一系列连续的局部小变形累积成整体的大变形。管坯在旋轧过程中要经受一个由圆形、三角形、再归整到圆形的变形过程。
|
|
Three-roll planetary rolling is of complex severe deformation process and it is difficult to study the forming laws.The finite element method was adopted to simulate three-roll planetary rolling deformation.The key of finite element simulations was discussed.Research shows that during the three-roll planetary rolling,the blank movement track is of spiral-shaped and the tube billet deformation is realized through a row of small local deformations and is accumulated into a large deformation.In the process of rolling,the tube billet becomes round,triangular,and then returns to the round of the deformation condition.
|
|
基金项目：
|
|
辽宁省博士启动基金项目(20071026)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]刘劲松,田春霞,张士宏,等.SPC技术在铜管生产线质量管理中的应用[J].锻压技术,2007,32(6):141-143.
[2]张士宏,张金利,刘劲松,等.铜管铸轧技术的新进展[J].世界有色金属,2006,(7):14-17.
[3]刘劲松,张士宏,邓子玉,等.面向CIMS/ERP的塑性成形生产过程控制[J].中国机械工程,2006,17(19):2080-2083.
[4]刘劲松,张海渠,姜年祥,等.基于WEB的铜管加工过程质量信息管理系统[J].锻压技术,2005,30(增刊):205-207.
[5]李章刚,李冰.铜合金管材铸轧工艺设计专家系统的开发及应用[J].中国机械工程,2005,16(23):2101-2105.
[6]李冰,杨志,刘化民,等.三辊行星轧制运动和管坯变形规律的仿真模拟[J].塑性工程学报,2005,12(5):70-73.
[7]Shih C K,Hung C H,Hsu R Q.The finite element analysison planetary rolling process[J].Journal of Materials Pro-cessing Technology,2001,113:115-123.
[8]杨志,张士宏,许沂,等.连铸铜管坯三辊行星轧制的有限元模型建立[J].塑性工程学报,2003,10(6):70-73.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
