|
摘要：
|
|
探讨提高塑性成形数值仿真精度的途径,理论上介绍了塑性成形数值仿真中材料的非线性、摩擦边界条件和动态接触边界的处理等问题。给出常用于有限元分析的金属材料模型;对比划分网格不良和优良条件下的材料变形和温度模拟的差异、不同接触条件下金属变形的差异,并讨论网格重划分过程中金属体积的损失,利用实例证明塑性成形数值仿真在工业中的成功应用。
|
|
Approach for increasing precision of numerical simulation of plastic forming was discussed.The nonlinear of material,inter-object of part and dynamic contact were introduced.General material model was presented.The different deformation and temperature result was displayed with faulty and mesh.The deformation was illustrated with different inter-object conditions.The loss of volume because of remeshing was discussed.And the successful application of simulation technology in plastic forming industry was illustrated.
|
|
基金项目：
|
|
重庆市科技攻关项目(CSTC,2005AA3012-1);;
国家自然科学基金项目(50775229)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]陈军,张向,阮雪榆.金属三维挤压成形过程数值模拟的若干关键技术[J].中国有色金属学报,2002,12(6):1119-1122.
[2]马琳伟,孙乐民,张巧芳,等.数值模拟锻造成形的关键技术及应用[J].金属成形工艺,2003,21(6):17-20.
[3]傅建,谢彬,林南.等数值模拟技术在汽轮机叶片模锻成形中的应用[J].锻压技术,2007,32(2):98-101.
[4]周朝辉,曹海桥,吉卫,等.DEFORM有限元分析系统软件及其应用[J].热加工工艺,2003,32(4):51-52.
[5]胡建军,许洪斌,金艳,等.基于有限元计算的金属断裂准则的应用与分析[J].锻压技术,2006,31(6):100-102.
[6]胡建军,夏华,金艳,等.摩托车档位齿轮精锻成形工艺优化[J].热加工工艺,2006,35(13):53-55.
[7]方刚,雷丽萍,曾攀.金属塑性成形过程延性断裂的准则及其数值模拟[J].机械工程学报,2002,38(12):21-25.
[8]M Zhan,Liu YL,H Yang.Research on a new remeshingfor the 3D FEM Simulation of blade forging[J].J.Master.Process.Technol.,1999,(94):219-225.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
