锻压技术

液压机用流量反馈型电液比例流量阀的研制

英文标题：Research on electro-hydraulic proportional flow valve with flow feedback for a press

作者：冯天麟唐晓群田松

单位：华中科技大学机械学院华中科技大学机械学院华中科技大学机械学院湖北武汉430074 湖北武汉430074 湖北武汉430074

分类号：TH134

出版年,卷(期):页码：2008,33(3):94-96

摘要：

液压机快速大流量液压系统的无级调速是一个有待解决的技术问题。本文研究了一种适用于大流量调节与控制的流量反馈型电液比例流量阀。摒弃了大流量比例流量阀结构中在先导控制级和流量调节级之间设置一级液压随动增力放大装置──控制缸的三级控制方式,而采用二级控制。克服了体积大、制造工艺结构复杂、频率响应低、故障多等缺陷,达到了电流与流量控制的直接比例关系,扩大和补充了比例流量阀的调速选用范围,增强了液压传动作为压力机动力系统应用的性能保障。

The stepless speed of press hydraulic system with rapidly high flow is a difficult and challenging problem.A new electro-hydraulic proportional flow valve based on flow feedback was presented,which was adaptive to high flow control.Abandoning setting one step magnified device(three-step control way of cylinder)via plot and flow control for high flow proportional valve,an advanced two-step control method was proposed for the proportional flow valve.So it overcame a lot of weakpoints,such as structural complexity,lower frequency response,higher trouble etc.,and reached the direct proportional relationship by current and flow control.Furthermore,the designed method could enlarge and compensate the adjusted velocity rang of flow valve to improve press power systems capability.

基金项目：

参考文献：

[1]张春侠,周明贵.压力机滑块的升降速度[J].锻压技术,2006,31(2):67-68.
[2]路甬祥,胡大紘.电液比例控制技术[M].北京:机械工业出版社,1988.
[3]宋鸿尧,丁中尧.液压阀设计与计算[M].北京:机械工业出版社,1980.
[4]吴根茂,邱敏秀,王庆丰,等.实用电液比例技术[M].浙江:浙江大学出版社,1993.

服务与反馈：

【文章下载】【加入收藏】