锻压技术

镁合金摩托车把超塑胀形实验研究及数值模拟

英文标题：Experimental study and simulation of magnesium alloy tube used for motor handle

作者：陈拂晓李学烤杨永顺王建甫

分类号：TG115.5

出版年,卷(期):页码：2008,33(4):116-119

摘要：

采用WQ4100万能全息试验机对镁合金AZ31B进行拉伸实验,得到真实的应力-应变曲线。以此为基础,采用DYNAFORM,对不同的内压和轴向进给的匹配关系对壁厚的影响进行数值模拟,发现在轴向进给为15 mm,内压为5 MPa为最优加载路径。并通过实验验证了模拟分析的正确性。

The magnesium alloy AZ31B was explored in the tensile experiment using the WQ4100.Through the experiment,the relation formula of real stress,real strain and the curves of stress and strain were achieved.Based on this,using DYNAFORM software,the simulation of tube thickness of different relationships of internal pressure and axial feed was carried out.It was found that the optimum path was 15 mm axial feed and 5 MPa internal pressure.The correctness of simulation analysis was verified by analyzing the reason and through the process experiment.

基金项目：

洛阳市科技发展计划项目(0602018A-2)

参考文献：

[1]党民,叶喜山,胡景春,等.国内旋压技术的现状与发展[J].热加工,2003,(4):44-45.
[2]张顺福,孙存福.国产旋压设备的发展和应用[J].金属成形工艺,2003,21(1):1-2.
[3]李继贞,李志强,邱福兴,等.国产旋压设备最新动态[J].热加工,2002,(8):61-62.
[4]郭超,杨永顺,周新平.挤压态AZ31B镁合金的超塑性研究[J].铸造技术,2007,28(2):242-244.
[5]包向军,蒋宏范,何丹农,等.材料参数对汽车覆盖件冲压成形性能影响的数值模拟[J].机械工程材料,2001,25(7):15-17.
[6]文九巴,杨蕴林,杨永顺,等.超塑性应用技术[M].1版.北京:机械工业出版社,2005.
[7]徐秉业,刘信声.应用弹塑性力学[M].1版.北京:清华大学出版社,1995.
[8]苑世剑,苗启斌,王仲仁.轿车后轴纵臂内高压成形研究[J].金属成形工艺,2004,22(3):1-3.
[9]郎利辉,苑世剑,王仲仁,等.防锈铝变径管内高压成形过程数值模拟[J].中国有色金属学报,2001,11(2):211-216.

服务与反馈：

【文章下载】【加入收藏】