|
摘要：
|
|
基于UGS NX环境开发出了新一代板料成形快速仿真系统FASTAMP-NX,该系统完全集成于NX环境,避免了数据转换带来的数据损失,充分利用了NX参数化特征建模的优势,实现了真正意义上的CAD/CAE无缝集成。系统求解器基于BT壳单元模型和改进的动力显式有限元算法,计算速度较同类商业求解器提高1.5倍以上。可应用于工艺设计和模具设计阶段,协助设计人员在统一的NX环境下快速分析与校核设计方案,大大提高了设计与分析的效率,使模具设计"当天工程"成为可能。
|
|
FASTAMP-NX is the new generation of sheet metal forming analysis system,which is completely based on UGS NX environment.The finite element model can be directly transformed from CAD model in "naught distortion" without any parameterized modeling feature loss to achieve the real CAD/CAE seamless integration.The solver is based on BT shell element and updated dynamic explicit FE method and is much faster than most commercial solvers.The system can be applied to potential defects prediction and process verification as the powerful assistance analytical tool in the uniform NX environment.The efficiency of design and analysis is greatly improved to make die design "one-day-cycle" possible.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50575080);;
国家科技支撑计划资助项目(2006BAF01A43)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Kubli W,Reissner J.Optimization of sheet-metal formingprocesses using the special-purpose program AUTOFORM[J].J.Mates.Proc.Tech.,1995,50:292-305.
[2]Hyunbo Shim.Determination of optimal shapes for thestampings of arbitrary shapes[J].J.Mates.Proc.Tech.,2002,121:116-122.
[3]周杰,常桂静,李铁,等.侧围前延长件的成形分析及有限元模拟[J].锻压技术,2006,31(2):43-45.
[4]徐金波,董湘怀.基于有限元分析的汽车覆盖件模具设计及优化[J].锻压技术,2004,29(1):63-67.
[5]Belytschko T,Lin J I,Tsay C S.Explicit algorithms fornonlinear dynamics of shells[J].Comput.Methods Appl.Mech.Eng.,1984,(42):225-251.
[6]王耕耘,王义林,吴勇国,等.覆盖件模具CAD系统的研究[J].锻压技术,1997,22(4):52-56.
[7]李素萍,刘剑,刘根生,等.基于UG参数化快速设计方法的研究及应用[J].锻压技术,2006,31(2):85-88.
[8]李畅,李建军,温建勇,等.基于UG的关联设计及其在级进模CAD系统中的应用[J].中国机械工程,2002,13(12):1967-1970.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
