|
多工位连续锻造过程的有限元模拟
|
|
英文标题：Finite-Element Simulation of Continuous Multistation Forging Processes |
|
作者：赵国群 阮雪榆 关廷栋 |
|
单位： 上海交通大学 上海交通大学 山东工业大学 |
|
关键词： |
|
分类号： |
|
出版年,卷(期):页码：1992,17(2):2-6 |
|
摘要：
|
|
本文探讨应用刚塑性、刚——粘塑性有限元模拟金属成形过程时所遇到的具体处理技术,提出一系列算法,开发了锻造过程通用有限元模拟系统,并应用该系统分析了多工位连续锻造过程的金属流动规律。
|
|
In this paper, the techniques or problems encountered in simulating metal forming processes by finite element method is studied. A series of algorithms is suggested. A general purpose FEM simulation system of forging processes is developed. The metal flow of continuous multistation forging processes is analyzed.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] Altan, T., "Process Simulation of Hot Die-Forging Process", Advanced Technology of Plasticity, Vol. 11, 1988．
[2] Alseneed, A. A. K., Hartely, P., Sturgess, C. E. N., Rowe, G. W., "Finite-Element Analysis of A Five-Stage Cold Forging Process", J. Mechanical Working Technology, Vol. 14, 1987．
[3] Oh, S. I., Gegel, H., "ALPIDP-Modeling of P/M Forging by the FEM", Proc. of NAMRC, Vol. 15, 1986．
[4] Oh, S. I., Tang, J. P., "Finite Element Mesh Rezoning and Its Application to Metal Forming Analysis", Proc. of Int, Conf. on Tech. of Plasticity, 1984．
[5] Kobayashi, S., Oh, S. I., Altan, T., Metal Forming and the Finite Element Method, Oxford University Press, New York, 1989．
[6] [美]阿尔坦著,陆索译,现代锻造,国防工业出版社,1984
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
