锻压技术

压实轮压下量对宽铜带连续挤压过程的影响

英文标题：Effect of coining roll reduction on continuous extrusion process for wide copper strip

作者：运新兵刘桂林宋宝韫樊志新

分类号：TG376

出版年,卷(期):页码：2008,33(5):72-75

摘要：

利用DEFORM-3D软件,对宽铜带连续挤压的压实轮压下过程进行数值模拟,获得坯料在不同压下量下的等效应力、等效应变、温度和挤压轮扭矩的分布情况。结果表明:在同一压下量下,坯料的等效应力和等效应变在压实轮压下过程中都逐渐增加;当金属进入到轮槽内并与挡料块接触间,坯料的等效应变保持不变,而等效应力则急剧降低;当金属流入到腔体内时,坯料的等效应变又急剧增加。随着压下量增加,在整个连续挤压过程中坯料的等效应力、等效应变、温度和挤压轮扭矩都增加。通过点的跟踪分析和挤压轮扭矩分析可知,压实轮压下量为6 mm时更适合宽铜带连续挤压。

The coining roll's pressing process of continuous extrusion for wide copper strip was simulated by software DEFORM-3D.The distribution of the billet's effective strain,effective stress,temperature and extrusion wheel's torque were obtained.The result shows that at the same reduction,the billet's effective strain and effective stress gradually increase during pressing process.When the metal is extruded in the extrusion wheel groove and contacted the abutment,the billet's effective strain is unchanged,but the effective stress dramatically decreases.When the metal flows into cavity,the billet's effective strain greatly increases.With the reduction increased in the continuous extrusion forming,the billet's effective strain,effective stress,temperature and extrusion wheel's torque all increase.From analysis of the point tracking and extrusion wheel torque,it is found that when the coining roll reduction is 6 mm,the wide copper strip is suitable for continuous extrusion.

基金项目：

国家自然科学基金资助项目(50635020)

参考文献：

[1]杨如柏,张胜华.连续挤压译文集[M].1版.长沙:中南工业大学出版社,1989.
[2]Cho J R,Jeong H S.Parametric investigation on the curlingphenomenon in CONFORM process by three-dimensional fi-nite dement analysis[J].Journal of Materials ProcessingTechnology,2001,(110):53-60.
[3]Kim Y H,Cho J R,Jeong H S,et a1.A study on optimaldesign for CONFORM process[J].Journal of MaterialsProcessing Technology,1998,(80-81):671-675.
[4]陈莉.铜扁线连续挤压成形过程的三维数值模拟[D].辽宁:大连铁道学院,2004.
[5]宋宝韫,樊志新,陈吉光,等.铜、铝连续挤压技术特点及工业应用[J].稀有金属,2004,28(1):257-261.
[6]谢玲玲,宋宝韫.铜母线连续挤压扩展成形过程的三维有限元数值模拟[J].锻压技术,2005,30(4):72-75.
[7]刘建生,陈慧琴,郭晓霞.金属塑性加工有限元模拟技术与应用[M].北京:冶金工业出版社,2003.
[8]吴朋越,谢水生,鄢明,等.铜扁线连续挤压过程温度场的数值模拟[J].锻压技术,2007,32(3):46-49.
[9]储灿东,彭颖红,阮雪榆.连续挤压过程仿真中的摩擦模型[J].上海交通大学学报,2001,35(7):993-997.

服务与反馈：

【文章下载】【加入收藏】