|
摘要：
|
|
针对启动齿星轮成形工艺的特点,对其成形工艺进行数值模拟分析,找出了影响挤压成形的工艺参数,设计了合理的启动齿星轮的成形工艺。通过工艺实验进行论证,结果表明,所设计的工艺既保证了启动齿星轮内曲面和外齿型的同心度,又解决了挤压过程中由于金属流动不畅造成的塌陷、缩孔现象,同时降低了挤压力,大大缩短了工艺实验周期,对于启动齿星轮的生产应用具有重要的指导意义。
|
|
Aiming at the characteristics of forming technology for the star wheel of stating gear,the analysis of numerical simulation about forming technology of the star wheel of starting gear was made,the craft parameters that influented extrusion forming were found out,and the rational forming technology of the star wheel of starting gear was designed.Then carrying on argumentation through craft experiments,the result indicates that the concentricity of inside curved surface and the outside tooth profile of the star wheel of starting gear is guaranteed,the sink and shrinkage caused by the problem that the metal can not flow fluently in the extrusion process are solved,the extrusion pressure is reduced,and the period of craft experiment is shortened.It is a great significance to guide production and application of parts.
|
|
基金项目：
|
|
贵州省科学技术基金资助项目(黔科合J字【2005】2101号)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]吴诗悖.挤压理论[M].北京:国防工业出版社,1994.
[2]刘汀,辛选荣,上官林建.超越齿轮冷挤模具设计及其实验结果分析[J].热加工工艺,2002,31(5):65-66.
[3]吴诗悖.冷温挤压[M].西安:西北工业大学出版社,1991.
[4]杨长顺.冷挤压模具设计[M].北京:国防工业出版社,1994.
[5]Adamowicz M,Albano A.Asolution of the rectangular cut-ting-stock problem[J].IEEE Transactions on Systems,Man and Cybemetics,1976,6(4):302-310.
[6]郑伟刚,罗延科,银华.奥氏体系不锈钢的塑性加工特性研究[J].锻压技术,2005,30(1):64-66.
[7]洪深泽.冷挤压工艺及模具设计[M].合肥:安徽科学技术出版社,1985.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
