|
摘要：
|
|
快速锻造液压机已成为目前重要的锻造设备之一。本文建立了12.5 MN双柱快锻液压机的整体三维有限元模型。针对其预紧组合机架的结构形式,对机架整体刚度的主要影响因素进行分析。根据偏载工况得到了预紧系数、拉杆与立柱强度等因素之间的关系,为机架整体设计提供了理论依据。对压机进行静态有限元分析,得到了机架主要部件的应力和位移的分布规律,并提出改进方案,确保机架的刚度和强度以及整体性指标达到使用要求。
|
|
The high speed forging hydraulic press has already become one of the most important forging equipment.The three-dimension finite-element model of the frame of 12.5 MN high speed forging hydraulic press was established.In allusion to the structure of fully pretightened combination frame,the influencing factors on the integrity of the frame were analyzed.According to the offset load condition,the relationship between the pretightening coefficient and the strength of the pull rod and column was analyzed and the reliable theoretical basis for design was provided.It introduced a complete static analysis of the whole structure of the frame to obtain the stress and displacement distribution.Proposal of structure improvement was presented in order to make the integrity,strength and stiffness of the frame meet the design requirements.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]吴生富,金淼,聂绍珉,等.液压机全预紧组合机架的整体性分析[J].锻压技术,2006,31(3):111-114.
[2]吴生富,聂绍珉,金淼,等.大型锻造液压机全预紧组合机架的整体性及影响因素分析[J].塑形工程学报,2006,13(2):110-113.
[3]张皓,贾方,王兴松.闭式压力机组合机身的有限元分析[J].锻压装备与制造技术,2006,32(3):32-35.
[4]尹红灵.30 000 kN三柱油压机缸梁有限元分析[J].锻压技术,2006,31(6):93-95.
[5]余心宏,李天恩,张盛华,等.快锻液压机机架静动态数值模拟[J].重型机械,2005,(2):25-27.
[6]俞新陆.液压机[M].北京:机械工业出版社,1982.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
