|
摘要：
|
|
通过对圆筒形零件拉深工艺与缩口工艺的对照比较,介绍该零件成形的工艺方案及实验过程。阐述了缩口成形工艺的成形特点,根据成形前后材料体积不变的原则,利用积分计算管子的缩口毛坯高度。并对模具设计与制造中存在的关键技术进行了研究分析。实现了用简单的缩口模具,生产出了合格零件。该模具不仅能保证工艺稳定,而且提高材料利用率和生产效率。因此,对细长的管状类零件,有时用缩口工艺代替拉深工艺可取得更好的效果。
|
|
The determination and verification of the process planning about tube-shaped parts were introduced by comparing drawing and necking process of the parts.The forming character of necking process was explained.Adopting the principle of the volume of material constant in the deformation process,the billet height of the necking tube was calculated using integral calculus.The key technology problems existing in the design and manufacture of the die were also studied.Qualified parts were produced with simple necking die.The die can ensure the stability of process;increase the utilization ratio of material and production efficiency.Sometimes it is more economic for slender tubular parts to neck instead of drawing.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]肖祥芷,王孝培.中国模具设计大典:第3卷[M].江西:江西科学技术出版社,2003.
[2]王孝培.冲压手册[M].北京:机械工业出版社,2000.
[3]梁炳文.板金冲压工艺手册[M].北京:国际工业出版社,1989.
[4]翟德梅,段维峰.端罩凸肩镦压成形工艺计算及模具研制[J].锻压技术,2007,32(2):67-68.
[5]刘华刚,冲压模具设计与制造[M].北京:化学工业出版社,2006.
[6]张如华,赵向阳,章跃荣.冲压工艺与模具设计[M].北京:清华大学出版社,2006.
[7]叶凯.薄壁工件缩口模的设计[J].机械工程师,2002,(5):23-25.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
