|
摘要：
|
|
通过自制的接触换热系数测量设备对铝合金与5CrMnMo模具钢、不锈钢与不锈钢间的接触换热系数进行了实验研究,分析了接触换热系数随温度和压力的变化趋势,并且分析了改变接触过程后接触换热系数的变化。实验结果发现,接触换热系数与温度的关系并不是简单的正比关系,而是与载荷近似成正比关系;且在其它接触条件相同的情况下,如接触过程的升温过程和降温过程、加载过程和卸载过程等不同,接触换热系数的测量值也不同。
|
|
A set of self-developed thermal contact conductance(TCC) measuring equipment was employed.The TCC coefficient between aluminum alloy and 5CrMnMo die steel,and that between stainless steels were measured by this system.The main influencing factors on TCC related to the interfacial temperature and the contact pressure were analysed.The change of the TCC coefficient was also analyzed when the contact processes were different.The results show that the TCC coefficient is not directly proportional to interfacial temperature,but is roughly in proportion to contact pressure,and the TCC coefficient will be much different when the contact processes are changed.
|
|
基金项目：
|
|
国家“973”资助项目(51319)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]刘华,茅清希,安恩科,等.有温差两杆件接触的热传导问题[J].同济大学学报,2002,30(6):686-689.
[2]Rosochowska M,Balendra R,Chodnikiewicz K.Measure-ments of thermal contact conductance[J].Journal of Materi-als Processing Technology,2003,135:204-210.
[3]赵剑锋,王安良,杨春信.接触传热表面粗糙度曲线的统计特征[J].低温工程,2003,(4):49-62.
[4]Lambert M A,Fletcher L S.Thermal Contact Conductanceof Spherical Rough Metals[J].Journal of Heat Transfer,1997,119:684-690.
[5]赵宏林,黄玉美,徐洁兰,等.常用结合面接触热阻特性的试验研究[J].西安理工大学学报,1999,15(3):26-29.
[6]徐烈,张涛,赵兰萍,等.双热流法测定低温真空下固体界面的接触热阻[J].低温工程,1999,(4):185-189.
[7]湛利华,李晓谦,胡仕成.界面接触热阻影响因素的实验研究[J].轻合金加工技术,2002,30(9):40-43.
[8]Marotta E E,Fletcher L S.Thermal contact conductance foraluminum and stainless contacts[J].Thermophysics andHeat Transfer,1998,12(3):374-380.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
