|
摘要：
|
|
根据激光重熔和多轴联动数控加工的特点,研究了复杂形状涂层激光重熔数控加工的轨迹生成算法,开发了激光重熔CAM软件,并且以抽油杆管接头热锻模为实例对软件进行实验验证。重熔后模具的表面硬度由HRC40提高到HRC50,满足其要求,取得了良好的表面改质效果。
|
|
According to the characteristics of laser re-melting and multi-axes synchronous NC machining,the path gen- eration algorithm of laser re-melting NC machining for the complex shape coatings was studied and the laser re-melting CAM software was also developed.The software was verified by the laser re-melting experiment of hot-forging die of pipe joint for sucker rods,and the die surface hardness increased from HRC40 to HRC50 after laser re-melting.The experiment results are quite satisfactory and meet the challenge.
|
|
基金项目：
|
|
国家自然科学基金(50474053，50475134)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]陈传忠，雷廷权，包全合，等．等离子喷涂-激光重熔陶瓷涂层存在问题及改进措施[J]．材料科学与工艺，2002，10 (4)：431-435．
[2]李其连．等离子喷涂参数对热障涂层热冲击性能的影响[J]．航空制造技术，2004，(6)：81-83．
[3]Buta Singh Sidhu,Puri D,Prakash S.Mechanical and metal- lurgical properties of plasma sprayed and laser re-melted Ni 20Cr and Stellite-6 coatings[J].Journal of Materials Pro- cessing Technology,2005,(159):347-355.
[4]Yang Yuanzheng,Zhu Youlan,Liu Zhengyi,et al.Laser re- melting of plasma sprayed Al_2O_3 ceramic coatings and subse- quent wear resistance[J].Materials Science and Engineering, 2000,(291):168-172.
[5]李言祥，李炜．用等离子喷涂加激光重熔方法在铝合金表面重熔陶瓷[J]．表面技术，1996，25(3)：35-37．
[6]张海鸥，刘辉祥，王桂兰．等．等离子熔射制模过程中皮膜温度场实验研究[J]．中国机械工程．2004，15(21)：1958- 1961．
[7]黄早文．向何军，张志坤．抽油杆平锻工艺的偏心力研究[J]．锻压技术，2006，31(1)：33-39．
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
