|
摘要：
|
|
采用有限元仿真的方法研究板料主要力学性能参数,以及表面摩擦状况对整体式侧围外板类零件冲压成形的影响,以获得整体式侧围外板类零件冲压成形材料关键性能参数的选取准则,并进行试验验证。结果表明:对整体式侧围外板类零件,应该选择材料屈强比sσ/σb<0.5,硬化指数n>0.22,厚向异性系数r>2.0,延伸率δ≥45%的板料。
|
|
Effect of material parameters and process parameters on the stamping formability of an integrated body side outer panel was studied by using finite element simulation method.Then,a rule on selecting key material parameters of sheet metal for integrated body side outer panel was obtained,and testified by experiments.The results show that the sheet metal material with the stress ratio σs/σb<0.5,the strain hardening exponent n>0.22,anisotropic parameter r >2.0 and the elongation δ≥45% should be selected for integrated body side outer panel.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]刁可山,陈新平,蒋浩民,等.外板圆角区域拉深破裂及影响因素研究[J].锻压技术,2008,33(2):23-26.
[2]聂昕,成艾国,申丹凤,等.汽车右侧围内板的成形分析及其在工程上的应用[J].锻压技术,2006,31(2):73-77.
[3]蒋浩民,程远明,陈新平,等.侧围外板整体成形有限元仿真及试验研究[J].材料科学与工艺,2003,11(3):281-283.
[4]赵侠,李飞.汽车发动机罩外板拉深成形的数值模拟[J].锻压技术,2008,32(5):50-53.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
