锻压技术

汽车离合器减震轴套精锻成形数值模拟与分析

英文标题：Numerical simulation and analysis of automobile clutch damping spindle sleeve precision forging process

作者：李建国汤文成

单位：东南大学机械工程系

分类号：TG316

出版年,卷(期):页码：2008,33(6):22-25

摘要：

简述了汽车离合器减震轴套的几种典型成形工艺。基于Deform3D通用有限元软件,应用三维刚粘塑性有限元显式算法对预减震轴套精锻成形过程进行了模拟分析,得出了变形中材料的流动状态和等效塑性应变分布规律。根据有限元模拟分析结果对减震轴套精锻成形工艺参数、模具结构进行了优化设计,并进行了预减震轴套精锻成形工艺试验。试验验证了有限元模拟分析结果,并精锻成形出合格的汽车预减震轴套产品。

Several typical forming processes of damping spindle sleeve were briefly explained.Based on general finite element software Deform 3D,3D rigid visco-plastic FEM was used to simulate the precision forging process,the laws of material flow and equivalent plastic strain distribution were revealed based on the results of FEM simulation.The process parameters and mould structure for precision damping spindle sleeve forging were optimized.Experiments of damping spindle sleeve precision forging were made,the qualified damping spindle sleeve was formed,and FEM simulation results were verified by experiments.

基金项目：

参考文献：

[1]Chen H Q,Wang Q.C,Guo H G.Research on the cast-ing-forging precision forming process of alternator poles[J].Journal of Materials Processing Technology,2002,129(10):330-332.
[2]Doege E,Bohnsack R.Closed die technologies for hot forg-ing[J].Journal of Materials Processing Technology,2000,98(1):165-170.
[3]程万军,赵立辉,黄良驹.星形套闭塞冷锻工艺及模具设计[J].模具工业.2003,(3):45-48.
[4]高永超,华林,赵玉民,等.汽车发电机磁极精锻成形三维有限元模拟和工艺优化[J].中国机械工程,2005,16(12):1110-1114
[5]刘建生,陈慧琴,郭晓霞.金属塑性加工有限元模拟技术与应用[M].北京:冶金工业出版社,2003.
[6]吕炎.精密塑性体积成形技术[M].北京:国防工业版社,2003.
[7]赵德颖,孙惠学,张春义.轿车转向节闭塞挤压成形新工艺研究[J].锻压技术,2006,31(2):36-68.
[8]魏志刚,汤文成,刘德仿.星形套冷挤压成形模具结构分析及优化[J].锻压技术,2006,31(4):59-63.
[9]中国机械工程学会锻压学会.锻压手册:第3卷[M].北京:机械工业出版社,1993.

服务与反馈：

【文章下载】【加入收藏】