|
摘要：
|
|
提出了锻件毛坯与齿轮形状相似性冷锻法,改善成形质量,同时锻坯中心孔分流,可降低成形力。用三维有限元仿真软件数值模拟圆柱斜齿轮的闭式冷锻过程,确定下端面带凹槽的齿轮锻坯形状,该形状能避免齿轮成形产生的折叠缺陷;通过对材料变形的应变场、应力场、速度场、加载曲线等规律的分析,确定变形严重的应力区和应变最大值分布位置,指出材料成形流动速度差过大,是产生成形折叠缺陷的原因。总之,形状相似性法的圆柱斜齿轮冷锻成形齿轮是可行和有效,具有工程实际应用意义。
|
|
A principle of the shape similarity forging method of the billet and the bevel gear was put forward so as to improve the deforming quality and decrease the deformed force by the billet middle hole.The numerical simulation of the forged deforming of cylindrical bevel gear was demonstrated by three-dimension simulating software to make certain the shape of the cylindrical bevel gear with a groove in the lower end.The shape could avoid the deforming collapses.Then the severe stress area and the maximum strain could be obtained with the analysis of strain,stress,velocity and the load curve of the material.The result of the deforming collapse is that the difference between the forged material flow velocities is too large.In conclusion,the method of the shape similarity forging cylindrical bevel gear is feasible and available and has an engineering practice application meaning.
|
|
基金项目：
|
|
合肥工业大学学生创新基金资助项目(XS0647)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Jung Min Lee,Byung Min Ki m,Chung Gil Kang.Astudy onthe cold ironing process for the drum clutch with inner gearshapes.International[J].Journal of Machine Tools&Manu-facture 2006,46(10):640 650.
[2]Lee Y K,Lee S R.Lee C H,et al.Process modification ofbevel gear forging using three-di mensional finite element analy-sis[J].Journal of Materials Processing Technology,2001,113(4):59 63.
[3]Jongung Choi,Hae-Young Cho,Chang-Yong Jo.Forging ofspur gears withinternal serrations and design of the dies[J].Journal of Materials Processing Technology,2000,104(7):1 7.
[4]江雄心,万平荣,扶名福,等.齿轮精锻的数值模拟与实验研究[J].塑性工程学报,2002,9(3):62 65.
[5]彭颖红.金属塑性仿真成形技术[M].上海:上海交通大学出版社,1999.
[6]吕炎.精密塑性体积成形技术[M].北京:国防工业出版社,2003.
[7]董湘怀.材料成形计算机模拟[M].北京:机械工业出版社,2006.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
