锻压技术

摩托车档位齿轮成形数值分析与模具结构优化

英文标题：Numerical analysis of motorbike profile modified gear forming and optimization of its mould structure

作者：罗静胡建军金艳夏华

单位：重庆工学院材料学院重庆工学院材料学院重庆工学院计算机学院重庆工学院材料学院重庆400050 重庆400050 重庆400050 重庆400050

关键词：档位齿轮温锻数值分析 FEM

分类号：TG316

出版年,卷(期):页码：2007,32(4):124-127

摘要：

根据摩托车档位齿轮的产品特点,通过分析各种可能工艺并进行比较,制定产品性能优良、生产效率极高的温锻精密成形工艺。针对产品特点引起模具磨损严重、生产过程成本高等问题,提出一种新的镶块模具结构,设置增压结构优化成形工艺,并对其可行性利用有限元软件进行模拟仿真。将模拟结果进行实际生产验证,从而获得一种生产摩托车档位齿轮和相似产品生产成本低、效率高、成形性能优良的精锻成形工艺和模具结构。

According to the characteristics of the motorbike's profile modified gear,a warm forging precision forming process was established through analyzing and comparing the possible processes,which could produce the product with high quality quickly.A new inserting block mould structure was put forward to solve the problems of badly mould worn out and high production cost,etc.The forming process was optimized by setting up a boosting structure.The feasibility of technology was simulated by FEM software and its result was validated in real production.So the low cost gear with good performance can be produced by this mould structure and forming technology.

基金项目：

重庆市自然科学基金资助项目(CSTC2005BB3080)

参考文献：

[1]贾德伟,谢谈,李源,等.摩托车齿坯闭式温精锻模具及工艺[J].模具技术,2000,(1):24 29,
[2]胡亚民,邓明,罗静.精密体积成形模具设计制造及其寿命[J].机械工艺师,2001,(2):32 33.
[3]夏华,胡亚民,刘峰,等.摩托车档位齿轮精锻成形研究,锻压技术,2005,30(4):6 8.
[4]肖景容.精密模锻[M].北京:机械工业出版社,1985.
[5]肖红生,林新波,张质良,等.温锻精密成形技术及其有限元模拟[J].锻压技术,2000,25(2):3 6.
[6]周立斌,曾健华.摩托车挡位齿轮锻坯温挤压工艺研究[J].机械工人(热加工),2000,(1):13 14.

服务与反馈：

【文章下载】【加入收藏】