|
摘要：
|
|
采用冷摆辗方法来成形轿车差速器半轴齿轮毛坯。首先分析了齿轮成形的工艺特点,利用三维有限元软件——DEFORM对成形过程进行模拟,得到成形过程的金属流动充填规律以及力学量场分布情况,并通过实验来验证模拟结果,为模具设计和制造提供参考。同时,将先进制造技术——CAM技术应用到模具制造中,加工的电极精度达到4级,进而加工出7级精度的齿轮毛坯。结果表明,采用冷摆辗方法来成形轿车齿轮是可行的。
|
|
The blank of car differential bevel gear was formed by cold rotary forging technology.The forming technology property was analyzed firstly,the deformation process with finite element method software—Deform was simulated,and metal flow,filling regularity and distribution of mechanics field were obtained.The simulation results were verified by experiment.Besides that,advanced manufacture method——CAM was used to manufacture mold pole.High precision electrical pole of IT 4 and gear blank of IT7 were obtained.The result proves that it is feasible to form the high precision gear through cold rotary forging.
|
|
基金项目：
|
|
河南省科技攻关项目(0424200101);;
河南科技大学基金资助项目(2004ZY050)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]何常青,夏巨谌,王新雲,等.轿车直齿圆锥齿轮冷精锻试验研究[J].锻压装备与制造技术,2005,(2):65-67.
[2]金海平.汽车齿轮精锻成型[J].天津汽车,2003,(1):53-58.
[3]周琨,陈国学.伞齿轮精密成形模具变形的数值模拟分析[J].塑性工程学报,2002,9(1):74-77.
[4]田华.非轴对称零件多工步摆动辗压的数值模拟及工艺优化[D].上海:上海交通大学,2005.
[5]胡亚民.摆动辗压的发展态势[J].机械工人(热加工),1999,(4):15-16.
[6]尹海星.伞齿轮冷摆辗精密成形工艺研究及其CAD/CAPP系统开发[D].武汉:武汉理工大学,2002.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
