|
摘要：
|
|
利用非线性有限元仿真软件MARC,研究了外螺旋凸筋管成形过程的三维弹塑性有限元模拟技术。对外螺纹铜管的拉深成形过程进行了模拟,得到了成形过程中工件内部的应力和应变分布规律。结果表明,拉拔过程中,管料发生轴向延伸,但各部分延伸量不均匀,最大延伸变形发生在筋底中心部分。在周向,整体上管料发生压缩变形,但在筋底部分产生一定的延伸,应变为正;径向发生压缩变形。在定径区及铜管离开定径区后,轴向应力均为拉应力,但沿壁厚分布不均匀;同样,拉拔周向应力沿壁厚方向也呈不均匀分布,出定径区后在筋底区的外表面为负,内表面为正。
|
|
Three-dimensional elastic-plastic finite element technology of the forming process of outer-spiral-rib tube was studied with the aid of nonlinear FEM software MARC.Drawing process of outer-spiral-rib copper tube was simulated.The stress-strain distribution discipline in steady-state was obtained.The results show that in the drawing process,the tube produces axial elongation,but the prolongation is not uniform at different parts of copper tube.The ultimate elongation distortion occurs in the core of rib bottom.In the circumferential direction,the tube produces compression deformation on the whole,but at the bottom of ribs,it produces some elongation and the strain is plus.In the radial direction,it occurs compression deformation.At and after fixed-diameter area,axial stress is all tensional stress,but it distributes nonuniform along the thickness.Similarly,drawing circumferential stress also distributes nonuniform along the thickness,it is minus at the outer surface of the rib-bottom zones after fixed-diameter area and it is plus at the inner surface.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王碧文.中国铜加工业技术现状及发展[J].世界有色金属,2005,(7):16-20.
[2]陈辉煌,刘赣华.内螺旋型拉深模的线切割加工[J].南方冶金学院学报,2001,22(1):21-24.
[3]李连诗.异形管制造方法[M].北京:冶金工业出版社,1995.12.日本特许平3-56137号公报.
[4]刘赣华,杨贵平.中央空调用外螺纹铜管拉深成形的实验研究[J].南方冶金学院学报,2002,23(2):22-26.
[5]彭颖红.金属塑性成形仿真技术[M].上海:上海交通大学出版社,1999.4.
[6]吴焕芳,温殿英.冷拔内螺旋凸筋管的有限元建模及其仿真实现[J].天津理工学院学报,2004,20(3):48-51.
[7]申卫华,刘化民,张士宏.铜管游动芯头拉拔道次优化的弹塑性有限元模拟[J].锻压技术,2005,30(3):39-42.
[8]申卫华,刘化民,张士宏,铜管游动芯头拉拔道次优化的弹塑性有限元模拟[J].锻压技术,2005,30(3):39-42.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
