|
摘要：
|
|
系统论述了金属基复合材料研究和发展的概况,简要介绍了金属基复合材料的常用金属基体、增强体,重点阐述了金属基复合材料常用的制备技术,即:搅拌铸造法、粉末冶金法、原位生成法等。另外,对金属基复合材料的润湿性、界面反应、复合材料力学性能和有限元模拟作了简单介绍。最后,对半固态成形技术应用于金属基复合材料中的成形加工发展方向做了展望。
|
|
The research history of metal matrix composites is summarized in the paper,conventional metal matrix and types of reinforcement of metal matrix composites are introduced and especially their fabrication methods,such as stir casting、powder metallurgy and in-situ synthesis are reviewed.In addition,the wettability、interfacial chemistry、mechanical properties of metal matrix composites and finite element analysis about metal matrix composites are simply studied.At last,the development trend about shaping of metal matrix composites by semi-solid forming techniques is presented.
|
|
基金项目：
|
|
国家自然科学基金(50465003);;
江西省科技厅;;
江西省教育厅资助项目(2005-26)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Hai Z Y,Xing Y L.Review of recent studies in magnesiu ma-trix composites[J].Journal of materials science,2004,39:6153 6171.
[2]李新林,王慧远,姜启川.颗粒增强镁基复合材料的研究现状及发展趋势[J].材料科学与工艺,2001,9(2):219224.
[3]李荣华,黄继华,殷声.镁基复合材料研究现状与展望[J].材料导报,2002,16(8):17 19.
[4]胡茂良,吉泽升,宋润宾,等.镁基复合材料国内外研究现状及展望[J].轻合金加工技术,2004,32(11):10 14.
[5]张修庆,滕新营,王浩伟.镁基复合材料的制备工艺[J].热加工工艺,2004,(3):58 61.
[6]李锋,林立,童晓,等.镁合金及其复合材料超塑性的研究现状[J].铸造,2003,52(7):455 461.
[7]董群,陈礼清,赵明,等.镁基复合材料制备技术、性能及应用发展概[J].材料导报,2004,18(4):86 90.
[8]周惦武,庄厚龙,刘金水,等.镁合金材料的研究进展与发展趋势[J].河南科技大学学报(自然科学版),2004,25(3):14 18.
[9]任德亮,丁占来,齐海波,等.SiCp/Al复合材料显微结构与性能的研究[J].1999,5(5):53 56.
[10]梅志,崔昆,顾明元,等.液态搅拌铸造SiCP及SiO2(P)增强Al 4wt%Mg基复合材的界面反应研究[J].复合材料学报,1998,15(4):43 47
[11]曾国勋,黎祚坚,朱和祥,等.液相搅拌铸造法制备SiCP/Al复合材料的力学性能[J].特种铸造及有色合金,2000,6:37 39.
[12]Zheng M Y,Wu K,Kamado S,et al.Aging behavior ofsqueeze cast SiCw/AZ91 magnesium matrix Composite[J].Materials Science and Engineering,2003,A348:67 75.
[13]谭彦显,周劲晖,蔡叶.SiCp/Mg(AZ81)镁基复合材料制备工艺的优化[J].热加工艺,1998,4:22 24.
[14]Trojanova Z,Lukac P,Ferkel H,et al.Stability of micros-turture in magnesium reinforced by nanoscaled alumina parti-cles[J].Materials Science and Engineer,1997,789:A234236.
[15]郗雨林,张文兴,柴东琅,等.复合材料工艺及性能的研究[J].热加工工艺,2001,5:24 26.
[16]郗雨林,张文兴,柴东琅,等.粉末冶金法制备了SiC颗粒及晶须增强MB15镁基复合材料组织及性能的研究[J].热加工工艺,2002,(1):51 53.
[17]张玉龙.先进复合材料制造技术手册[M].北京:机械工业出版社,2003.
[18]牛玉超,边秀房,耿浩然,等.Al2O3(P)/ZA35锌基复合材料的制备及其磨擦性能[J].中国有色金属学报,2004,14(4):502 506.
[19]崔峰,耿浩然,钱宝光,等.原位反应生成TiB2/ZA27复合材料的制备与性能[J].复合材料学报,2004,21(4):87 91.
[20]黄赞军,胡敦芜,杨滨,等.原位Al2O3颗粒强化铝基复合材料的研究[J].金属学报.2002,38(6):568 574.
[21]Frantisek C,Pavel L,Jens K,et al.Characteristics of ther-mal cycling in a magnesium alloy composite[J].MaterialsScience and Engineering,2002,A325:320 323.
[22]Inem B.Dynamic recrystallization in a thermomechanicallyprocessed metal matrix composite[J].Materials Science andEngineering,1995,A197:91 95.
[23]贾玉玺.挤压加工对SiC/Al复合材料组织和性能的影响[J].塑性工程学报,2000,7(4):5 8.
[24]Hu Lianxi,Wang Erde.Fabrication and mechanical proper-ties of SiCw:ZK51A magnesium matrix composite by two-step squeeze casting[J].Materials Science and Engineering,2000,(A278):267 271.
[25]高珊,赵浩峰,付珍.镁基复合材料液态成形技术的发展[J].特种铸造及有色合金,2003,增刊:57 59.
[26]Noguchi A,Ezawa I,Kaneko J,et al.SiC/Mg-Ce and Mg-Caalloy composites obtained by spray forming[J].Journal ofJapan Institute of Light Metala,1995,45(2):64.
[27]Mayencourt C,Schaller R.Mechanical-stress relaxation inmagnesium-based composites[J].Materials Science and En-gineering.2002,A325:286 291.
[28]李子全.预处理SiC颗粒在ZA-27合金中的分散润湿过程和界面反应模型[J].南京航空航天大学学报,2002,34(3):240 244.
[29]Huang Y D,Hort N,Dieringa H,et al.Microstructural in-vestigations of interfaces in short fiber reinforced Al-Si12CuMgNi composites[J].Acta Materialia,2005,(53):3913 3923.
[30]孙国雄,廖恒成,潘冶.颗粒增强金属基复合材料的制备技术和界面反应与控制[J].特种铸造及有色金属,1998,4:12 17.
[31]Sanjay K T.Brij K D.The influence of interfacial characteris-tics between SiCp and Mg/Al metal matrix on wear[J].Co-efficient of friction and microhardness,2001,247:191 201.
[32]崔岩,史文方.SiCP/Al复合材料界面控制与评价新方法[J].航空学报,2000,21(6):571 574.
[33]胡连喜,李小强,王尔德,等.挤压变形对SiCW/ZK51A镁基复合材料组织和性能德影响[J].中国有色金属学报,2000,10(5):680 683.
[34]李四清,刘瑞民.TMC-2复合材料固溶处理工艺[J].金属学报,2002,Suppl,38(9):505 506.
[35]Svoboda M,Pahutova M,Kucharova K,et al.The role ofmatrix microstructure in the creep behaviour of discontinuousfiber-reinforced AZ91 magnesium alloy[J].materials Sci-ence and Engineering,2002,A324:151 156.
[36]Hu H.Grain microstructure evolution of AM50A/SiC,metalmatrix composites[J].Scr Mater,1998,39(8):1015
[37]Manoharan M,Gupta M,Lai M O,et al.Application ofmodel for work hardening behaviour of sicreinforced magnesi-um based metal matrix composites[J],Materials Scienceand Technology,2000,16(6):670 674.
[38]陈建刚,张文兴,柴东朗.碳化硅颗粒增强镁基复合材料损伤性能的研究[J].金属功能材料,2002,9(2):33 35.
[39]顾金海,张小农,顾明元.纤维增强AZ91镁基复合材料的阻尼性能[J].航空材料学报,2004,24(6):29 33.
[40]罗守靖,张广安.Csf/Al复合材料管的制备与性能[J].锻压技术,2003,4:25 27.
[41]张小农,张荻,吴人洁,等.增强物的加入对纯镁阻尼性能的影响[J].复合材料学报,1998,15(2):14 16.
[42]柴东朗,曹利强,李晓军,等.镁基复合材料微区力学状态的有限元分析[J].稀有金属材料与工程,2005,34(1):60 63.
[43]李晓军,柴东朗.SiCP颗粒增强镁基复合材料微区应力场的仿真模拟[J].金属学报,2004,40(9):927 929.
[44]胡培,薛元德.单向拉伸复合材料断裂过程的计算机模拟[J].纤维复合材料,1999,16(2):29 32.
[45]Newaz G M,Bonora N,Krishnappa M.Computational anal-ysis of mixed-mode delamination crack growth in a woven lam-inated ceramic-matrix composite[J].Composites Science andTechnology,1999,59:2287 2292.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
