|
摘要：
|
|
在盒形件拉深成形智能化控制过程中,为了防止法兰起皱的产生,必须认识起皱发生的机理,进而对起皱的发生进行控制。本文基于一点应力状态的C B准则建立了应用与判断法兰起皱的判断准则,完善了起皱的预测方法,给出了获得起皱的临界行程与压边力关系曲线的方法,这为进一步实现法兰起皱的实时预测提供了依据。
|
|
In intelligent control of rectangular box deep drawing,the wrinkling theory should be recognized in order to avoid flange wrinkling.In this way,the occurrence of winkle can be controlled.In this paper,the criterion of flange wrinkling is set up and the predictive method of flange wrinkling is improved based on C-B rule.Finally the way to get the curve between critical stroke and blank holder force is lay out which will give the farther support to predict the flange wrinkling in real time.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50375136)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]赵军,张双杰,等.拉深过程智能化控制中的法兰起皱临界条件[J].燕山大学学报,1998,22(3):197 201.
[2]王保华,唐景林,等.薄板冲液拉深法兰起皱失稳研究[J].锻压技术,2003(2):18 20.
[3]梁金生,梁广川,高兴华.不锈钢薄板拉深失稳的研究[J].河北工业大学学报,1998,27(2):114 120.
[4]胡成武.圆筒形金属容器拉深成形时压边力的确定[J].包装工程,1997,18(4):28 31.
[5]Cao Jian,Wang Xi.An analytical model for plate wrinklingunder tri-axial loading and its application[J].InternationalJournal of Mechanical Sciences,2000,42(3):617 633.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
