|
摘要：
|
|
着重从几何仿真的角度,对楔横轧模具虚拟加工系统的设计与实现等相关问题进行了研究。首先比较了传统的和虚拟的楔横轧模具加工方法,并提出了楔横轧模具虚拟加工系统VMS的体系结构。该系统主要有4大模块组成,即加工环境建模模块(MEMM)、自动编程模块(APM)、数控代码识别模块(INCCM)、加工过程仿真模块(SMPM)。文中还初步阐述了楔横轧模具虚拟加工系统各主要模块的功能、原理及实现机制。研究对楔横轧模具虚拟加工系统的设计、建立和实现提供了一定的理论依据。
|
|
The relative problems about the design and implement of virtual machining system for Die of cross wedge rolling(DCWR) is presented in the present study,mainly from the angle of geometric simulation.In this paper,the traditional and virtual machining approaches of DCWR are compared first.Then,the framework of virtual machining system(VMS) of DCWR is discussed.This system consists of four blocks,which include the Machining Environment Modeling Module(MEMM),the Automatic Programming Module(APM),the Identification of NC Code Module(INCCM) and Simulation of Machining Process(SMPM).The function,principle and mechanism of implement of module of VMS are also described in preliminarily.The research provides the theoretical basis for design,build and implement of virtual machining system for DCWR.
|
|
基金项目：
|
|
国家自然科学基金重点资助项目(50435010)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]胡正寰,等.楔横轧零件成形技术与模拟仿真[M].北京:冶金工业出版社,2004.
[2]肖田元,韩向利,王新龙,等.虚拟加工技术的研究[J].计算机集成制造系统—CIMS,1999,5(3):16 20.
[3]Gao J,Zheng D T,Gindy N.Mathematical representation offeature conversion for CAD/CAM system integration[J].Robotics and Computer Integrated Manufacturing,2004,20(5):457 467.
[4]张国彬,林亨,袁守华,等.车削中心数控加工仿真系统程序检查模块的开发[J].机械设计与制造,2001,(3):1315.
[5]孙宏伟,马玉林.数控加工仿真器加工代码的计算机识别[J].航空制造技术,2000,(5):24 26.
[6]Ding S,Mannan M A,Poo A N.Oriented Abounding box andoctree based global interference detection in 5-axis machining offree-form surfaces[J].Computer-Aided Design,2004,36(13):1281 1294.
[7]谭光宇,袁哲俊,姚英学.加工过程碰撞干涉的矢量法检验[J].中国机械工程,1999,10(5):513 515.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
