|
摘要：
|
|
综述了国内外有限元模拟技术(FEA)的发展和在冲压成形领域中的研究状况和应用水平,着重介绍了在冲压模具应力应变分析、结构优化设计和尺寸精度控制方面采用有限元法(FEM)的现状。通过利用弹性有限元法进行冲压模具的应力应变分析,可以优化模具设计,在延长模具寿命、缩短模具开发周期、降低开发成本和提高产品质量等方面均可取得显著的成效。最后指出了FEM在模具分析中的研究和应用的不足之处,并对今后的发展方向提出了看法。
|
|
This paper summarizes the development of finite-element analysis (FEA) and reviews the worldwide research and application of numerical simulation in cold forming field. Primarily discusses the use of finite element method (FEM) for die stress/strain analysis and optimum tool geometry and dimensional accuracy. It is showed that by using FEM for die stress and strain analysis when the die is regarded as an elastic body, we could improve and optimize the die design. And by FEM analysis we could get great effect in developing dies, such as prolong life of die, shorten period of die development, lower cost of die development and improve quality of product, etc. At last, outlines the deficiency of research and application of FEM in die analysis and puts forward the developmental trends of FEM analysis in the future.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1](美)约瑟夫.计算机模拟与模具应力分析[J].紧固件技术,2000,(3):2226.
[2]MuammerKoc,MehmetA.ArslanDesignandfiniteelementa nalysisofinnovativetoolingelements(stresspins)toprolong dielifeandimprovedimensionaltolerancesinprecisionforming processes[J].JournalofMaterialsProcessingTechnology,2003,142(3)773785.
[3]AltanT,KimK,YamanakaM.Predictionandeliminationof ductilefractureincoldforgingsusingFEMsimulations[C].in:ProceedingsoftheNAMRCSocietyofManufacturingEngi neers,Houghton,MI,1995:6372.
[4]QinY,BalendraR.FEsimulationoftheinfluenceofdie elas ticityoncomponentdimensionsinforwardextrusion[J].In ternationalJournalofMachineToolsandManufacture.1997(32):185.
[5]LapovkR.Improvementofdielifebyminimisationofdamageaccu mulationandoptimizationofperformdesign[J].JournalofMa terialsProcessingTechnology.1998,8081:608612.
[6]LeeYoungseon,LeeJunghwan,IshikawaT.Analysisofthe elasticcharacteristicsatforgingdieforthecoldforgeddimen sionalaccuracy[J].JournalofMaterialsProcessingTechnol ogy,2002,130131:532539.
[7]LeeYoung Seon,LeeJung Hwan,ChoiJong Ung,IshiKawa T.Experimentalandanalyticalevaluationforelasticdeforma tionbehaviorsofcoldforgingtool[J].JournalofMaterials ProcessingTechnology,2002,127(1):7382.
[8]PedersenThomasOrts.Numericalmodellingofcyclicplasticity andfatiguedamageincold forgingtools[J].International JournalofMechanicalSciences,2000,42(4):799818.
[9]MacCormackConor,MonaghanJohn.Failureanalysisofcold forgingdiesusingFEA[J].JournalofMaterialsProcessing Technology2001,117(12):209215.
[10]GadalaMS,WangJ.Computationalimplementationofstress integrationinFEanalysisofelasto plasticlargedeformation problems[J].FiniteElementsinAnalysisandDesign,2000,35(4):379396.
[11]RodicT,etal.Optimalpre stressingofcoldforgingdies.In:AdvancedTechnologyofPlasticity[C].Proceedingsofthe6thICTP,1999:253258.
[12]McCormackConor,MonaghanJohn.Afiniteelementanalysis ofcold forgingdiesusingtwo andthree dimensionalmodels[J].JournalofMaterialsProcessingTechnology,2001,118(13)286292.
[13]SunJS,LeeKH,LeeHP.Effectsofgeometryandfilletra diusondiestressesinstampingprocesses[J].JournalofMa terialsProcessingTechnology.2000,104(3):254264.
[14]刘建生,陈慧琴,郭晓霞.金属塑性加工有限元模拟技术与应用[M].北京:冶金工业出版社,2003.
[15]黄德海,陈国学.多层组合预应力模具失效分析及优化设计[J].塑料工程学报,2003,(4):5861.
[16]李海峰,谢志毅,赵晓平.模具在工件反挤压过程中的变形模拟研究[J].金属成形工艺,2003,(5):1922.
[17]孙杰,等.冲压成形过程中有限元网格模型的建立[J].模具工业,2003,(6):36.
[18]张鹏,张晓冬.冲压模CAE技术及软件选型方法[J].金属成形工艺,2003,(2):4850.
[19]但文蛟,王耕,胡树根,等.板料成形CAE技术[J].模具技术,2002,(3):3739,57.
[20]刘勇谋.CAE软件发展的新动向[J].计算机辅助设计与制造,2001,(2):8386.
[21]胡平.覆盖件模具CAD/CAE/CAM一体化技术现状与发展[J].机械工人(冷加工),2000,(10):34.
[22]尹红灵,娄臻亮,孙吉先.数值模拟技术在新产品模具设计中的应用[J].模具技术,2003,(5):58.
[23]方刚,雷丽萍,曾攀.基于有限元分析的汽车覆盖件模具设计[J].模具工业,2002,(6):610.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
