|
摘要：
|
|
在分析传统模具CAM系统局限性的基础上 ,提出一种面向模具制造的ICAM构架。该构架基于柔性主模型概念 ,采用EZMap曲面表达模型 ,便于实现模具CAD/CAPP/CAM的集成 ,同时支持模具设计和制造的并行工程。刀具路径生成采用基于构形空间 (ConfigurationSpace ,C Space)的新算法 ,可以很好地满足模具传统和高速数控加工对CAM系统的需求 ,是一个理想的模具CAM构架。
|
|
Having analyzed the inherent problems of conventional CAM systems, the paper proposes an ICAM architecture for a CAM system for die and mould machining. Using 'soft' master model concept and EZMap model representation of surface, the integration of CAD/CAPP/CAM is easily realized in the ICAM architecture. By using the master model, the ICAM architecture supports concurrent engineering in die design and machining. The configuration space (C\|Space) approach was adopted to generate tool\|path, which meets both the conventional NC machining and high speed NC machining requirements. In a word, the ICAM architecture is an idealized one.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 周济,周艳红数控加工技术北京:国防工业出版社,2002
2 BKChoi,YCChung,JWParkUnifiedCAM systemarchitecturefordieandmouldmanufacturing.ComputerAidedDesign,1994,26(3):235～243
3 BLHockNCprogrammingforhighspeedmachining.ModernMachineShop,1996
4 BKChoi,DHKim.C spaceapproachtotool pathgenerationfordieandmouldmachining.ComputerAidedDesign,1997,29(9):657～669
5 JGHemmett,BKFussellArobustandefficientapproachtofeedratese lectionfor3 axismachinng.“SubmissionforDynamicsandControlRe movelProcess”2000ASMEIMECE
6 BKChoi,BHKim,DHKimFeatureextractionforCAPPofdie cavitymachining.PresentedattheIFIPWG52WorkshoponGeometricModelinginCAD ,May1996,Aillie,VA
7 KMorishige,YTakeuchiToolpathgenerationusingC spacefor5 axiscontrolmachining.TransactionsoftheASME .1999,121(144)
8 王庆林,李莉敏,韦纪祥UG铣制造过程实用指导北京:清华大学出版社,2002
9 BKChoiSTOPP :anapproachtoCAD/CAMintegration.ComputerAid edDesign1985,17(4):162～168
10 BKChoi,RBJerard.Sculpturedsurfacemachining.Dordrecht:Kluw erAcademicpublishers,1998
11 BKChoi,KKoC spacebasedCAPPalgorithmforfreeformdie cavitymachining.ComputerAidedDesign,2003,35(2):179～189
12 TakeuchiY etalDevelopmentofapersonalCAD/CAMsystemformouldmanufacturingbasedonsolidmodelingtechniques.AnnCIRP ,1989,38(1):429～432
13 JGHemmett.Discretemodelingofsculpturedsurfacemachiningforro bustautomaticselection.Dissertation,2001,5
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
