|
摘要：
|
|
铝型材挤压过程中的出口速度,是模具优化设计的重要参数之一,型材出口速度不均的原因之一是模具设计不当。为了获得高质量的挤压制品,对模具出口区域速度分布的研究是必须的。本文采用DEFORM3D对铝型材进行了3D模拟,获得了在模具制造之间铝型材的出口速度。数值模拟的结果得到了实验的验证,这对优化模具过程是非常重要的。
|
|
The exit velocities in the process of aluminum profiles extrusion appear to be the most important parameters for optimal die design. Incorrect die design is one of the reasons for different velocities in profiles. To receive extruded product with high quality, it is necessary to know the arrangement of the velocity profile at the outlet of die. The deformation process of aluminum profiles is simulated by finite element software, DEFORM-3D ,which gives us an opportunity to get exit velocities of profiles before the manufacturing of die. Numerical simulation results are confirmed by experimental procedure in real production conditions, which is very important for optimal die design process.
|
|
基金项目：
|
|
四川省科技厅应用基础项目(0021780)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] 谢建新,刘静安.金属挤压理论与技术[M],冶金工业出版社,2001.
[2] 闫洪,包忠诩.型材挤压过程三维弹塑性有限元模拟[J].轻合金加工技术,2000,28(11):3033.
[3] 马思群,孙彦彬,等.金属挤压成型的数值模拟技术研究,大连铁道学院学报[J],2002,2(23):811.
[4] 彭颖红.金属塑性成形仿真技术[M].上海:上海交通大学出版社,1999.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
