锻压技术

拉深过程中压边力分布实验测量方法与数值模拟

英文标题：Numerical simulation and experimental measurement method of contact stress distribution between blank-holder and die during sheet metal forming

作者：孙成智罗思东王东川柯枫杜汉斌

单位：上海汽车工业(集团)总公司汽车工程研究院上海汽车工业(集团)总公司汽车工程研究院上海汽车工业(集团)总公司汽车工程研究院上海汽车工业(集团)总公司汽车工程研究院上海汽车工业(集团)总公司汽车工程研究院上海200030 上海200030 上海200030 上海200030 上海200030

关键词：板料成形压边圈弹性变形应力分布

分类号：TG386.32

出版年,卷(期):页码：2005,30(6):18-21

摘要：

通过数值模拟和实验,研究了压边圈结构对冲压成形过程中压边应力分布的影响,建立埋入式压边应力测量系统,对冲压过程中压边圈与板料之间的接触应力进行了测量,结果表明压边圈结构的变化对压边圈和板料之间的接触应力有显著影响,通过合理设计压边圈结构,可以实现在压边圈不同部位施加不同的压边应力,从而改善冲压件的成形性能。

In this paper,the effect of the structure of blank-holder on the distribution of blank-holder stress during sheet metal forming has been investigated by numerical simulation and experimental measurement method.The embedded measurement system of contact stresses is established.The results indicate that the contact stresses depends on the structure of blank-holder and the different distribution of contact stresses around the blank-holder can be obtained by reasonably designed blank-holder and the formability of stamped part can be improved.

基金项目：

参考文献：

[1]Siegert K,Hohnhaus J,Wagner S.Combination of hydraulicmultipoint cushion system and segment-elastic blank-holders[J].SAE 980077.
[2]Doege E,Sommer N.Blank-holder pressure and blank-holderlayout in deep drawing of thin sheet metal[C].AdvancedTechnology of plasticity:Proceeding of the Second Internation-al Conrerance on Technology of Plasticity,1987.
[3]Shulkin Leonid,Jansen S W,et al.Elastic deflection of theblank holder in deep drawing of sheet metal[J].Journal ofMaterials Processing Technology,1996,59(1 2):34 40.
[4]Doege E,Elend L E.Design and application of pliable blankholder systems for the optimization of processes conditions insheet metal forming[J].Journal of Materials ProcessingTechnology,2001,111(1 3):182 187.
[5]Neugebauer R,Leib U,et al.Influence on materials flow indeep drawing using individual controllable draw pins andsmooth blank-holder design[J].SAE 970989.
[6]Ahmetoglu M A,Coremans A,Kinzel G L,et al.Improving draw-ability by using variable blank holder force and pressure in deep draw-ing of round and non-symmetric parts[J].SAE 930287.
[7]Obermeyers J,Majlessi S A.A review of recent advances in theapplication of blank-holder force towards improving the form-ing limits of sheet metal parts[J].Journal of Materials pro-cessing technology,1998,75(1 3):222 234.

服务与反馈：

【文章下载】【加入收藏】