|
摘要：
|
|
充分发挥计算机数值模拟与物理实验相结合进行研究的优点 ,运用正交分析方法 ,针对影响热镀锌钢板拉深成形性能的主要工艺参数 (凹模圆角半径、凸模圆角半径、压边力以及润滑剂 )进行正交试验 ,得出以上 4种工艺参数对热镀锌钢板成形性能影响的显著性指标 ,并对工艺参数进行了优化组合。
|
|
Taking advantage of combining numerical simulation experiment with spot experiment, orthogonal method was applied to analyzing the experiment data in this paper. Results showed that four process parameters had great effects on the forming properties of hit galvanized steel sheet during the drawing. In accordance with primary and secondary, the four parameters were die edge radius?punch edge radius?drawing pressure of upper ring and drawing compound. The best combination of process parameters was made in conclusion.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 董湘怀等金属塑性成形计算机模拟的若干进展金属成形工艺2000,18(1):1～4
2 王东哲板料拉深成形变压边力理论和试验研究上海交通大学博士学位论文,2001
3 中国现场统计研究会三次设计组等正交法和三次设计北京:科学出版社,1985:63～70
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
