锻压技术

基于有限元分析的精冲液压机机身结构优化

英文标题：Optimization of fine blanking machine's frame based on finite element analysis

作者：吕琳邓明李艳霞王正立

关键词：精冲液压机机身结构有限元

分类号：TG315.4

出版年,卷(期):页码：2010,35(2):102-106

摘要：

针对精冲机复杂、瞬时、重载的受力条件和精冲模的高精度对设备刚度提出的高要求,设计精冲机机身结构,建立精冲机机身结构有限元分析模型;根据精冲机机身的上横梁、立柱、下横梁3部分的有限元分析结果,提出机身结构的改进方案并进一步模拟分析;得到了更优的结构方案,改进了精冲机机身结构;改进后的机身刚度和强度均满足要求,最后绘出优化的精冲机机身结构。

For the fine blanking machine's complexity,instantaneous,heavy stress conditions and fine-blanking die's high-precision,which put forward a high stiffness requirement of the equipment,the structure of fine-blanking machine's frame was designed,and its finite element analysis model was established,then based on the result of the fine blanking machine's entablature,crutch and lower separator,a modified scheme of frame structure was put forward and further simulation was carried out to get the best scheme and improve the structure of fine blanking machine's frame.After the modification,both the stiffness and the strength met the requirements of frame structure,and finally the most optimized frame structure of fine blanking machine was drawn.

基金项目：

重庆市科技攻关项目(CSTC,2010AC3032)

参考文献：

[1]周开华,幺延先,译.简明精冲手册[M].北京:国防工业出版社,1993. [2]张秀玲.梁位移的有限单元法[J].企业技术开发,2003,(10):6-9,12. [3]徐中明,牟笑静,彭旭阳.基于有限元法的发动机曲轴静强度分析[J].重庆大学学报,2008,31(9):977-981. [4]王羽亮,任国峰,王健.LCK6890G城市客车车身结构有限元分析[J].客车技术与研究,2008,(5):5-8. [5]陈永光,陈旭,郭钢,等.某型液压机工作台和上横梁有限元分析研究[J].计算机辅助工程,2001,10(4):1-4. [6]杨秀平,宗升发,曹晓邮.液压机结构设计的有限元法[J].重型机械,2003,(6):38-41.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】