|
摘要：
|
|
针对钛合金导管内径滚压成形中的关键问题进行了有限元模拟分析。模拟结果表明:成形中滚柱径向进给使导管材料既产生径向流动又产生轴向流动;成形后导管管套之间存在的残余接触力,是导管管套紧密连接在一起的重要原因;最后参考有限元模拟结果,进行了管套与导管的连接成形试验,试验结果与模拟结果吻合,并且连接试验件顺利通过连接强度试验,证明连接件具有较强的连接强度和良好的密封性能。
|
|
The key problems of the internal rolling connection for titanium alloy tubes were analyzed with the method of finite element simulation.The result shows that the radial feeding of the rollers makes the tube materials flow in the radial direction and the axial direction.The residual contact force,which is the important reason for the tight connection between the tube and sleeve,exists between the tube and sleeve.According to the analysis of the finite element,the forming experiments between the tube and sleeve were completed.The results of the experiments and the finite element are anastomotic well.And the tube joints passed the test of connection intensity,which proves that the tube joints have high connecting strength and well sealing capability.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]吕昕宇,张士宏,曾元松,等.连接导管内径滚压成形有限元模型的建立及分析[J].塑性工程学报,2005,12(2):85-88.
[2]吕昕宇,许沂,张士宏,等.钛合金连接管件内径滚压成形的数值模拟[J].锻压装配与制造技术,2004,(3):82-84.
[3]Zeng Y S.Finite element simulation and experimental research onthe internal rolling connection for titanium alloy tubes[J].Ma-terials Science Forum,2005,475-479:3287-3200.
[4]曾元松,李志强.连接导管的先进塑性成形技术试验研究[J].金属成形工艺,2003,21(3):4-7.
[5]段成红.管子和管板连接接头的强度和密封性能研究[D].北京:北京化工大学,2007.
[6]王同海.管材塑性加工技术[M].北京:机械工业出版社,1998.
[7]GJB 3230-98.航空液压导管和接头试验方法[S].
[8]GJB 7000-94.挤压式无扩口导管安装拧紧力矩及试验要求[S].
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
