锻压技术

上横梁加强板成形工艺分析与数值模拟

英文标题：Technology analysis and numerical simulation on the top bridge reinforce plate

作者：张永波王双林马伟

关键词：板料成形工艺分析数值模拟

分类号：TG386.41

出版年,卷(期):页码：2010,35(4):40-43

摘要：

采用经验分析的方法对上横梁加强板的成形工艺做了详细分析。经过试模、工艺改进、再试模后，应用Autoform 4.04软件对制件的成形过程进行了数值模拟，优化工艺参数，并进行了实验验证。将模拟得出的制件厚度变化与最终冲压测量结果做了对比分析，得出了上横梁加强板的合理成形工艺和具体工艺参数，提高了材料的利用率，减少了试模次数，降低了成本。对同类件的生产具有一定的参考价值。

The analysis on forming technology of top bridge reinforce plate was carried out through empirical analysis. After experimental stamping,techincal improving and second experimental stamping, the forming process was simulated by Autoform404 software. The technological parameters were optimized and the simulated results were testified by final experimental stamping. The result of numerical simulation on thickness variation was compared with the ac[JP2]tual measurement of the part. The perfect forming technology of top bridge reinforce plate was concluded, and specific technological parameters were gained. Production cost was reduced due to the less times of experimental stamping and the higher ratio of material utilization. It serves a valuable example for the production of the same kind of parts.

基金项目：

参考文献：

［1］毕彦，周耀东，姜立忠，等.汽车连接件成形工艺分析与模拟[J].模具工业，2009， 35(9)： 26-29.
［2］姜银方，孟英，朱元右.汽车支架零件的拉深工艺与模具设计[J].锻压技术，2007，32(3)：64-67.
［3］朱兴华，蔡炳芳.轻型载货汽车纵梁模具设计及成形性仿真分析[J].锻压技术，2008，33(6)：54-56.
［4］赵侠，李飞.汽车发动机罩外板拉深成形的数值模拟[J].锻压技术，2008，32(5)：50-53.
［5］张永波，徐西松，王广业.汽车骨架零件成形工艺数值模拟分析与优化[J].模具工业,2008，(11):30-33.
［6］郑晖，于利凯.汽车前底板冲压工艺分析与拉深模设计[J].锻压技术，2009， 34(3) :103-105.
［7］杨玉英.大型薄板成形技术[M].北京：国防工业出版社，1996.
［8］薛啟翔.冲压模具设计制造难点与窍门[M].北京：机械工业出版社，2003.
［9］陈文亮.板料成形CAE分析教程[M].北京：机械工业出版社，2005.
［10］John G Lenard.Metal forming science and practice[M].麻永林，李慧琴，邢俶清，等，译.北京：化学工业出版社，2006.

服务与反馈：

【文章下载】【加入收藏】