锻压技术

圆柱直齿轮精锻成形毛坯体积的工程计算

英文标题：Engineering calculation of cylindrical spur gear billet volume in precision forging process

作者：陈晓伟池成忠白庆平

关键词：齿轮精锻横截面积毛坯体积

分类号：TG316.3

出版年,卷(期):页码：2010,35(5):28-31

摘要：

提出了一种齿轮横截面积的工程计算方法，与CAD法提出的齿轮横截面积精确算法的计算结果相比其相对误差不大于1%，公式简单，使用方便。通过此算法计算齿轮的体积，运用Pro/E软件构造齿轮实体，对计算结果进行校核，其相对误差也在1%以内。把此算法作为确定毛坯体积的依据进行了试验验证，经检测最终所得到的齿轮锻件几何尺寸满足要求。结果表明,此算法计算精度高，完全符合工程需要，是一种值得推广的工程算法。

A kind of engineering method for calculating the gear cross sectional area was put forward. Comparing with the calculating result of the accurate method presented in CAD, the method is simple with less than 1% relative error. The gear volume was calculated through this algorithm and the gear solid was constructed by Pro/E software in order to check the outcome of above algorithm. The relative error was also less than 1%. On this basis，a series of experiment researches were carried out. The volume of billet was decided according to this algorithm and the geometries of final forged gear met the demands. The conclusion proves that this algorithm possesses high precision, which is entirely consistent with the voice of engineer and is worthy to be promoted.

基金项目：

参考文献：

［1］Cai J, Dean T A, Hu Z M. Alternative die designs in net-shape forging of gears[J]. Materials Processing Technology, 2004,150:48-55.
［2］Eyercioglu O, Kutuk M A, Yilmaz N F. Shrink fit design for precision gear forging dies[J]. Materials Processing Technology,2009,209:2186-2194.
［3］谭险峰,刘霞,胡德锋,等.约束分流精锻成形直齿圆柱齿轮[J].锻压技术,2010,35（2）：26-30.
［4］夏巨谌.精密塑性成形工艺[M].北京：机械工业出版社，1999.
［5］许锋,薛克敏,李萍,等.基于均衡思想高凸台圆柱直齿轮冷锻成形[J].锻压技术,2009,34（5）：16-18.
［6］夏巨谌.金属材料精密塑性加工方法[M].北京：国防工业出版社,2007.
［7］池成忠,许树勤.齿轮半精热锻件的齿形设计[J].锻压机械，1997,（5）：15-17.
［8］许树勤,池成忠.双联齿轮半精锻工艺的实验研究[J].材料科学与工艺,2000,（4）：54-56.
［9］崔建伟,池成忠. 一种齿轮横截面积的精确算法[J].太原理工大学学报,2003,34（3）：316-317.
［10］王东.基于Pro/E关系式的渐开线斜齿圆柱齿轮参数化设计[J].机电产品开发与创新，2009,22（5）：95-97.

服务与反馈：

【文章下载】【加入收藏】