锻压技术

带下陷航空钣金零件展开及参数化建模研究

英文标题：Development and parameterized modeling for aircraft sheet metal components with joggle

作者：曹蔚甘忠李立军

关键词：航空钣金零件下陷展开算法 CATIA

分类号：TP391.72

出版年,卷(期):页码：2010,35(5):148-151

摘要：

飞机钣金零件中有一类零件带有下陷，其下陷区域展开困难，目前主要采用经验方法展开，精度不高。提出一种针对下陷零件的展开算法，为下陷零件提供实用准确的处理流程, 编程实现该类钣金展开的自动计算；对飞机钣金零件展开毛坯进行CATIA参数化建模。实践证明，本系统展开结果正确，精度满足要求，误差不超过0.3 cm，方便操作。

There are some parts with joggle in sheet metal parts of airplane and the unfolding of these components are difficult. At present, an empirical method is mainly used to develop these parts and the precision is low. The research of the algorithm of development for aircraft sheet metal components with joggle was carried out. The practical method of development for aircraft SMC with joggle was provided and programmed for the auto calculation of the development for this kind component. CATIA model of the typical aircraft sheet metal component was built up to finish the parameterized modeling. Practice proves that the result of the system is correct and the precision meets the requirements. The error is not more than 0.3 cm and easy to be operated.

基金项目：

参考文献：

［1］曹蔚.飞机框肋类零件弯边展开CAD系统的研究开发[D].西安：西北工业大学,2006.
［2］朱小凯.弯边零件下陷区域展开技术研究[D].西安：西北工业大学,2006.
［3］甘忠,韩琦,曹蔚，等.基于CATIA的飞机展开壁板数字化模型的建立[J].锻压技术,2006，31(6): 110-114.
［4］曹蔚，甘忠.飞机框肋类零件弯边展开核心算法的研究[J].机床与液压，2006，(7)：116-120.
［5］曹蔚，甘忠.飞机钣金零件弯边自动展开系统的研究与开发[J].航空制造技术, 2008，(1)：84-87.
［6］吕庆莉,陈桦.钣金展开系统的设计[J].陕西科技大学学报, 2005, 23(3):77-80.
［7］张燕琴，李友根，周素安,等.基于正反向模拟的板料毛坯设计方法研究[J].锻压技术, 2010,35(1):159-161.
［8］赵景怡,甘忠. 弯边零件下陷区域展开技术研究[J].机床与液压，2007,35(9): 79-80,84
［9］Prasad K S R K，Selvaraj P. Practical methods of computer-aided flat pattern development for sheet metal components[J]. International Journal of Production Research，2004, 42: 3011-3039 .
［10］Choi J C, Kim B M，Chul Kim. An automated progressive process planning and die design and working system for blanking or piercing and bending of a sheet metal product[J]. Int. J. Adv. Manuf. Technol.， 1999，15:485-497.

服务与反馈：

【文章下载】【加入收藏】